Panasonic DMREZ27EB Operating Guide

Page of 76
54
RQT8856
Using a fully wired 21-pin Scart cable
You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
➔ 34).
You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
“AV1 Output” in the Setup menu is set to “RGB 1 (without component)” or “RGB 2 (without component)” (
➔ 51)
“AV2 Input” settings in the Setup menu (
 51)
Use of the supplied RF coaxial cable
To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial cables when you 
connect this unit to your TV and Video Cassette Recorder.
Keep the RF coaxial cables as far away as possible from other cables.
Do not roll up the RF coaxial cables.


Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions.
Be sure to read the Caution for AC Mains Lead on page 3.
Adding a VCR-Connecting to a Television and a Video Cassette Recorder
AV1
TV)
COMPONENT
VIDEO OUT
AV2(EXT)
AV OUT
RF IN 
Rear of TV 
Rear of this unit 
To household mains socket
To the aerial
To household 
mains socket
Rear of VCR
RF OUT 
AV OUT 
To household mains socket
RF IN 
RF coaxial cable
(included, black)
The RF coaxial cable cannot 
be used for showing pictures
from the unit. The unit must
be connected by another
means e.g. 21-pin Scart cable
to show pictures from the unit 
on the television set.
AV IN 
After completing the above connections, proceed to the TV Tuning (
➔ 10).
To recording from a VCR
Refer to “Recording from an External Device” (
➔ 22).
Additional Connections
RQT8856-B_DTP_070306.indb   54
RQT8856-B_DTP_070306.indb   54
2007/04/04   17:49:35
2007/04/04   17:49:35