Panasonic DMR-EZ25EB Operating Guide

Remote Control

Clock

Owner ID

DVD 1

System Update

Initialize

TAB

SELECT

RETURN

DVD 1

Remote Control

DVD 2

DVD 3

Disc
Picture
Sound
Display
Connection

Tuning

Others

ENTER

RETURN

SELECT

Setting the remote control
If you use another Panasonic unit at the same location, change the mode of the remote 
control so that you can operate the units independently of each other. 
Change the code of the remote control so that you can simultaneously
operate another Panasonic DVD unit.

Apply the selected setting [DVD 1, 2 or 3] to the remote control.
! Press and hold ENTER and press the appropriate number button 1, 2 or 3 for at least 

2 seconds.

! Exit the menu with RETURN.

Set up the remote control for the unit.
! Select [DVD 1, 2 or 3] with  

 and confirm with ENTER.

If the remote control setting does not match that of the unit, DVD 1, 2 or 3 appears on 
the unit’s display.
! Press ENTER and press the appropriate number key 1, 2 or 3 simultaneously for 

at least 2 seconds.

If you want to operate two units independently of each other using the same 
remote control, then change the remote control setting.

Under adverse reception conditions, etc., the Automatic time correction function 
may not work. In this case the indication for Clock setting is automatically reset to 
[Off]. If the reception conditions improve later on, it is possible to activate this 
function. 
If the Clock setting is set to [On], do not set it to [Off], otherwise the automatic time 
correction function is deactivated. 
This DVD Recorder uses a 24-hour-clock. 
In the event of a power failure an automatic back-up system maintains the clock for 
approximate 60 minutes. 
When the Clock setting is set to [On], the automatic time correction function checks 
and if necessary adjusts the time several times every day. The automatic time 
correction function only works when the DVD Recorder is in standby, it does not 
work in the Timer Recording mode. 

Clock setting
The clock will normally be set correctly during Auto-Setup however, under certain 
circumstances the DVD Recorder cannot set the clock automatically. In this case 
follow the operation steps below to manually set the clock. 

!

Switch with 

 automatic mode to [Off] and confirm with ENTER. 

!

Change with 

 and    Time and Date. 

!

Confirm the change with ENTER. 

Don't forget to change summer time and winter time. 

 

 

Activating the automatic time correction function 
The correct time for the clock can be automatically maintained when the DVD 
Recorder is tuned to a station that transmits a time signal. 

!

Switch with  

 automatic mode to [On] and confirm with ENTER. 

The automatic setting of the clock begins.

On

Clock

Automatic

Please set the clock.
ENTER :  access       RETURN : leave

ENTER

CHANGE

RETURN

Time

Date

10

52

04

20

 3

2006

:

:

/

/