Panasonic DMR-EZ25EB Operating Guide
52
This unit’s rear panel
4
AC mains lead (included)
Connect only after all other
connections are complete.
Connect only after all other
connections are complete.
To household mains socket
(AC 220 V to 240 V, 50 Hz)
(AC 220 V to 240 V, 50 Hz)
RF IN
Television’s rear panel
4
To household
mains socket
RF coaxial cable
(included, black)
(included, black)
2
The HDMI connection can be used only with units that are suited for HDMI.
9
3
HDMI-cable
1
2
3
4
Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
Connect RF OUT (Aerial output) of the DVD Recorder with the
aerial input of the TV.
Connect HDMI AV OUT of the DVD Recorder with the HDMI input of the TV.
For Q Link functions:
Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with the
Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with the
Scart input of the TV.
Connect the DVD Recorder and the television to the household mains socket.
HDMI IN
Only use fully wired
cables showing the HDMI logo.
Use cable of max. 5 m in length to avoid interference with
the video signal.
the video signal.
HDMI
Connection with HDMI cable (not included)
To the aerial
To this unit
Use one of the included RF coaxial cable (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial cable.
RF coaxial cable (included, grey)
RF coaxial cable (included, black)
or
1
1
AV IN
Fully wired 21-pin
Scart cable
(enables Q Link functions)
(enables Q Link functions)
3
The RF cable cannot be used
for showing pictures from the
DVD Recorder. The unit must
be connected by another
means e.g. Scart cable to show
pictures from the DVD
Recorder on the television set.
for showing pictures from the
DVD Recorder. The unit must
be connected by another
means e.g. Scart cable to show
pictures from the DVD
Recorder on the television set.
After completing the above connections, proceed to the Auto-Setup to tune
in TV channels.
in TV channels.