Panasonic dmr-ez45vebs Operating Guide

Tuning
Disc

Picture
Sound

Display

Connection

Others

Remote Control

Clock

Owner ID

DVD 1

System Update

VHS

Initialize

TAB

SELECT

DVD 1

Remote Control

DVD 2

DVD 3

Remote control 
signal sensor

7 m

ENTER

RETURN

SELECT

Trademark Code
Panasonic 01-04,45
AIWA 35
AKAI 27,30
BLAUPUNKT 09
BRANDT 10,15
BUSH 05,06
CURTIS 31
DESMET 05,31,33
DUAL 05,06
ELEMIS 31
FERGUSON 10
GOLDSTAR/LG 31

SANYO 21
SBR 06
SCHNEIDER 05,06,29-31
SELECO 06,25
SHARP 18
SIEMENS 09
SINUDYNE 05,06,33
SONY 08
TELEFUNKEN 10-14
THOMSON 10,15,44
TOSHIBA 16

WHITE WESTINGHOUSE 

05,06

Trademark Code
NOKIA 25-27
NORDMENDE 10
ORION 37
PHILIPS 05,06
PHONOLA

 31,33

PIONEER 38
PYE 05,06
RADIOLA 05,06
SABA 10
SALORA 26
SAMSUNG 31,32,43
SANSUI 05,31,33

Trademark Code
GOODMANS 05,06,31
GRUNDIG

 09

HITACHI 22,23,31,40-42
INNO HIT

 34

IRRADIO 30
ITT

 25

JVC 17,39
LOEWE 07
METZ 28,31
MITSUBISHI 06,19,20
MIVAR 24
NEC

 36

Point the remote control at the sensor of the unit. Avoid obstacles along the 
transmission path. The maximum reach of the remote control is 7 metres directly in 
front of the unit. Make sure that the transmission window and the sensor on the unit 
are clean. The process can be impaired by direct sunlight and glass cabinet doors.

You can lock the buttons on the unit and the remote control.

!

Press and hold the RETURN and ENTER buttons until [X HOLD] appears in the 
display. The buttons on the unit are locked.

!

To unlock the child protection, repeat the process until [X HOLD] disappears.

Change the code on the remote control to control your TV.

!

Press and hold the TV on and off button.

!

Enter the two-digit code for your television.
You must repeat this process after changing the batteries.

!

Press AV. 
Switches between TV reception and AV input each time the button is pressed.

Some television models of the listed brands (e.g. older Panasonic units) cannot be 
controlled via the remote control.

If you are using another Panasonic unit at the same location, change the setting of 
the remote control so that you can operate the units independently of each other.

Apply the selected setting [DVD 1, 2 or 3] to the remote control.

!

Press and hold ENTER and press the appropriate number button 1, 2 or 3 for at 
least 2 seconds.

!

Exit the menu with RETURN.

Set up the remote control for the unit.

!

Press FUNCTIONS.

!

Select [To Others] with  

 and confirm with ENTER.

!

Select [Setup] with  

 and confirm with ENTER.

!

Select [Others] with  

, [Remote Control] with    and confirm with ENTER.

!

Select [DVD 1, 2 or 3] with  

 and confirm with ENTER.

If the remote control setting does not match that of the unit, [DVD 1, 2 or 3] appears 
on the unit’s display.

!

Press ENTER and press the appropriate number key 1, 2 or 3 simultaneously for 
at least 2 seconds.

If you want to operate two units independently of each other using the same 
remote control, then change the the remote control setting.