Panasonic DMREX93CEG Operating Guide

Page of 92
2
VQT2J40
\
∫ Batteries
≥Insert so the poles (i and j) match those in the remote control.
≥Use alkaline or manganese batteries.
≥Do not mix old and new batteries.
≥Do not use different types at the same time.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct 
sunlight for a long period of time with doors and windows closed.
≥Do not take apart or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can 
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long 
period of time. Store in a cool, dark place.
Remote control operations (> 4)
∫ Use
The distance and angles are an approximate.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR 
PERFORMANCE OF PROCEDURES OTHER THAN THOSE 
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS 
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. 
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR 
PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, 
DRIPPING OR SPLASHING AND THAT NO OBJECTS 
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE 
PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE ARE 
NO USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, 
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. 
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT 
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO 
OVERHEATING, ENSURE THAT CURTAINS AND ANY 
OTHER MATERIALS DO NOT OBSTRUCT THE 
VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS 
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND 
SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS 
LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY 
FRIENDLY MANNER.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace 
only with the same or equivalent type recommended by the 
manufacturer. Dispose of used batteries according to the 
manufacturer’s instructions.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
This product may receive radio interference caused by mobile 
telephones during use. If such interference is apparent, please 
increase separation between the product and the mobile 
telephone. 
The socket outlet shall be installed near the equipment and 
easily accessible.
The mains plug of the power supply cord shall remain readily 
operable.
To completely disconnect this apparatus from the AC Mains, 
disconnect the power supply cord plug from AC receptacle.
CLASS 1
LASER PRODUCT
(Inside of product)
supplied accessories
Please check and identify the supplied accessories.
(Product numbers correct as of April 2010. These may 
be subject to change.)
1
Remote control
(N2QAYB000471)
1
AC mains lead
For use with this unit only. Do not use 
it with other equipment.
Also, do not use cords for other 
equipment with this unit.
1
RF coaxial cable
2
Batteries
for remote control
The remote control information
Getting started
R6/LR6, AA
30
20
30
20
Remote control signal sensor
7 m directly in front of the unit
DMREX93C-VQT2J40_eng.book  2 ページ  2010年4月26日 月曜日 午後12時2分