Panasonic DMREX87 Operating Guide

24

RQT8866

 Turn on the unit.
 [RAM] If the disc is protected, release protection 

(

¼60).

 When the output signal from the external device is 

NTSC, change the “TV System” to “NTSC” in the 
Setup menu (

¼ 67).

This unit cannot record NTSC signals to discs that 
already have PAL signal recordings. (However, both 
types of programmes can be recorded onto the 
HDD.)

 To reduce noise in input from a video cassette 

recorder, set “AV-in NR” to “On” in the on-screen 
display (

¼ 59).

 

DRIVE

 SELECT

  to select the HDD or DVD 

drive. 

− If you selected the DVD drive, insert a disc

(

¼ 78). 

 

REC MODE

 to select the recording 

mode (

¼ 20).

Connect cables while both the unit and the external 
device are turned off.

Front of the unit

REC

OPEN

/CLOSE

L/MONO - AUDIO- R

VIDEO

S VIDEO

AV3 IN

You can get a 
sharper, clearer 
picture by connecting 
with an S Video cable 
instead of the yellow 
video cable.

S Video cable

Audio/
video cable

[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]

  Start play on the external device.

 

REC

 at the point you want to 

start recording to the disc.

 

SELECT

INPUT

 to select the input where 

your external device is connected.

–

 

Front panel inputs are AV3.

 Tips

 You can also connect to the AV2 on the rear.
 If the audio output of the external device is monaural, connect to 

L/MONO on the AV3 input terminals at the front.

 Notes

 When timer recording starts while recording from an external 

device, timer recording takes priority and recording from the 
external device stops.

DMR-EX77_87EB.indb   24

DMR-EX77_87EB.indb   24

2007/05/17   11:11:58

2007/05/17   11:11:58