Panasonic DMREX95VEBS Operating Guide
DVD HDD
VHS
33
Recording
RAM
RAM
RAM
Specifying a time as the recording duration
This function is not available for Timer Recordings.
!
Press
REC on the unit during recording.
The recording time changes each time the button is pressed on the unit display:
OFF 0:30 1:00 1:30 2:00 3:00 4:00 OFF
OFF 0:30 1:00 1:30 2:00 3:00 4:00 OFF
!
Press STOP . The recording is paused and the time setting is deleted.
The unit switches itself off at the end of the recording if no functions are being
executed on another drive.
The unit switches itself off at the end of the recording if no functions are being
executed on another drive.
Direct TV recording
If your TV is equipped with Q Link, you can record a TV programme that you are
currently watching. Other settings are not necessary. The recorder automatically
switches to the appropriate station.
currently watching. Other settings are not necessary. The recorder automatically
switches to the appropriate station.
!
Press DIRECT TV REC for 3 seconds. Recording begins.
!
Press STOP to stop the recording.
DIRECT TV REC
DVD/HDD: This function is not possible with Flexible Rec. If the channel or
recording mode (XP, SP, LP, EP) is changed while recording is paused, the time is
deleted.
recording mode (XP, SP, LP, EP) is changed while recording is paused, the time is
deleted.
VHS: If the tape speed is changed during the recording, a slight picture distortion
will occur at that point.
will occur at that point.
DVD/HDD playback during recording
During the recording, you can the playback from the beginning of the programme.
During the recording, you can the playback from the beginning of the programme.
!
Press PLAY during recording or Timer Recording.
At least 2 second must have elapsed since the beginning of the recording.
At least 2 second must have elapsed since the beginning of the recording.
Recording from an external unit, e.g. a camera
!
Connect the external unit to the AV3 input terminals on the front side of the unit.
!
Select one of the two connection options.
The S VIDEO cable and audio cable (L/R) connection delivers the best quality.
The S VIDEO cable and audio cable (L/R) connection delivers the best quality.
You cannot receive signals from PCs with this unit.
Selecting the sound track to record for programmes with dual-channel sound
Recording to VHS: Insert a video cassette with an intact write-protection tab.
Recording to DVD/HDD: Insert a recordable disc.
If you activated the write-protection, cancel it.
Not
!
Select the VHS drive with DRIVE SELECT.
!
Select the DVD or HDD drive with DRIVE SELECT.
!
Select the recording mode with REC MODE.
!
In STOP-mode use INPUT SELECT to select input channel AV3.
!
Start playback on the external unit.
!
Press
REC at the point where you want to start the recording.
!
Use STOP to stop the recording.
!
Select the recording mode with REC MODE.
!
In STOP mode, use INPUT SELECT to select input channel AV3.
!
Press PLAY .
!
At the point where you wish to start recording press PAUSE .
!
Press
REC.
!
Start playback on the external unit.
!
Then press PAUSE to start the recording.
!
Use STOP to stop the recording.
Analogue channels
!
Before recording, select Sound setting Bilingual Audio Selection [M1] or [M2] in the
Setup menu.
Select [M1] or [M2] on an external unit before recording.
Setup menu.
Select [M1] or [M2] on an external unit before recording.
!
If the output signal of the external unit is an NTSC signal, set the TV System to
[NTSC] in the Setup menu.
[NTSC] in the Setup menu.
AV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN R
AV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN R
S VIDEO-cable
Audio cable
L - White
R - Red
Audio/Video cable
Video - Yellow
L
- White
R
- Red
Recording in dual-channel audio
On DVD-RAM and HDD, both channels of a
programme in dual-channel sound are
recorded.
Use
On DVD-RAM and HDD, both channels of a
programme in dual-channel sound are
recorded.
Use
DISPLAY to switch between the two
recorded sound tracks.
Digital channels
!
Press DISPLAY and select Audio setting [Multi Audio].
HDD