Panasonic RX-ES29 Operating Guide

Page of 18
RQT7967
6
y
Use of Batteries
If this unit is not used for a long period of time or is used 
only from an AC power source, remove all the batteries 
to prevent potential damage due to possible battery 
leakage.
Align the poles (+ and –) correctly when inserting the 
batteries.
Do not mix old and new batteries or different types of 
batteries.
Do not recharge ordinary dry cell batteries.
Do not heat or disassemble the batteries. Keep them away 
from flame or water.
Do not keep together with metallic objects such as 
necklaces.
Do not use rechargeable type batteries.
Do not use batteries if the covering has peeled off.
Mishandling of batteries can damage other items, cause 
damage to the unit, and may cause a fire through 
short-circuiting or electrolyte leakage.
If electrolyte leaks from the batteries, consult your dealer. 
Wash thoroughly with water if electrolyte comes in contact with 
any part of your body.
Power Sources
To operate the unit on AC power 
(1)
 
Connect the AC power supply cord.
Conserving power
The unit consumes 2.7 W even when it is turned off with 
[
]. To save power when the unit is not to be used for a 
long time, unplug it from the household AC outlet. Remember to 
reset the radio stations and any other memory items before 
using the unit again if you haven’t inserted memory batteries.
1: Household AC outlet (AC 120 V, 60 Hz)
2: AC power supply cord (included)
To use batteries (not included) 
(2)
Disconnect the AC power supply cord from unit to operate on 
battery power.
The remote control cannot turn the unit on when batteries are 
used.
To remove the batteries 
[A]
Open the battery cover, insert a finger into the hole in the 
bottom of the unit and push the batteries out.
Memory Batteries 
Memory batteries retain memory (clock/timer/CD/radio 
settings) during power supply interruption.
These batteries do not power the unit.
* Memory batteries are not included.
To replace the batteries 
(3)
The memory batteries last for about 1 year.
Connect the unit to AC power before replacing the batteries.
Extend the memory battery life by always pressing 
[
to turn the unit off before disconnecting the unit 
from the AC power source or replacing the power batteries.
To remove the batteries 
(4)
Lift the negative end of the number 4 battery to remove 
batteries.
POWER 
POWER 
Battery life
” flashes on the display when the batteries are 
running down.
Then, the unit turns itself off and displays “U01”.
Replace all the batteries with new ones.
POWER 
POWER 
(1)
AC IN
2
1
2
1
3
4
(3)
(R6/LR6, AA, UM-3)
(R20/LR20, D, UM-1)
5
1
2
4
3
6
8
7
(2)
[A]
outer
row
inner
row
(4)
1
2
4
3
RX-ES29-ad.book  6 ページ  2005年3月23日 水曜日 午後5時47分