Panasonic DMREX79EB Operating Guide

81

RQT9299

Notes

 When using 8 cm DVD-RAM or 8 cm DVD-R, remove the 

disc from the cartridge.

 It is not possible to record or play continuously from one 

side of a double sided disc to the other. You will need to 
eject the disc and turn it over.

Handle discs by the edges to avoid inadvertently scratching or getting 
oil from your fi ngers on the disc. Do not touch the signal surface of 
discs (the shiny side).

Discs are not indestructible and occasionally dirt or condensation 
may appear. Clean by gently wiping with a soft, dry lint-free cloth in a 
straight line from the centre of the disc to the edge of the disc.
Return discs to their cases when not in use; this helps to protect 
against scratches and dirt.

 Do not place or store discs in the following locations:

–

Direct sunlight

–

Very dusty or humid areas

–

Near a heat source

–

Places that undergo extreme shifts in temperature (condensation 
can occur)

–

Where static electricity or electromagnetic waves occur

 Discs that are not perfectly circular in shape
 Warped discs, which may not balance properly in your unit, causing 

improper operation or damage to the unit

 Cracked discs
 Discs with exposed adhesive (from removed stickers or labels, such 

as may occur with rental discs or improperly cared-for discs that 
were previously labeled or re-labeled)

[RAM] Use cartridges to protect them from scratches and dirt.

Automatic drive select function
[RAM] [Only for discs with the write-protect tab on the cartridge set to 
“PROTECT” (  68, Setting Protection)]
[DVD-V] [VCD] [CD]
 If the unit is recording to the HDD or stopped, it automatically 

switches to the DVD drive when a disc is inserted.

 If you eject a disc and close the disc tray, the HDD drive is 

automatically selected.

 Before inserting any USB memory to this unit, ensure that the data 

stored therein has been backed up.

 Check the orientation of the USB connector and insert it straight in.
 Insert an USB device while the unit is stopped, so the “USB device” 

screen is displayed. Select an item, then press [OK] to switch to the 
USB-related operations (

 

 38, 63).

Removing the USB memory
 Complete all USB-related operations and pull the USB memory 

straight out.

 If a USB memory being accessed is pulled out, then the data may be 

damaged.

   Press [

 OPEN/CLOSE] to open the tray. 

– Insert a disc.

   Press [

 OPEN/CLOSE] to close tray. 

Insert label-up.

Insert label-up with the arrow 
facing in.

Insert fully.

DMR-EX79EB.indb   81

DMR-EX79EB.indb   81

2009/01/14   14:53:11

2009/01/14   14:53:11