Panasonic DMREH80V Operating Guide
108
[MODE 1] [MODE 2] [MODE 3]
ENTER
ENTER
Others
Settings
Options
SETUP
13
F
U
N
T
IO
N
S
To Others
FUNCTIONS selection menu
Clock
Off
Automatic
0
00
00
1
1
2005
:
:
.
.
Time
Date
Tuning
Disc
Picture
Sound
Display
Connection
Connection
SETUP
Others
Remote Control
MODE 1
Clock
Power Save
Power Save
Shipping Condition
Default Settings
Default Settings
Language
English
SELECT
RETURN
TAB
CHANGE
ENTER
RETURN
Off
Quick Start
On
Please set the clock.
ENTER: access RETURN: leave
Remote Control
Clock
Power Save
Quick Start
Shipping Condition
Default Settings
Language
Change the code of the remote control so that you can also use another
it at the same time.
Panasonic DVD un
Manually setting the clock
!
Select Clock and confirm with
ENTER.
!
Use to switch automatic mode to [Off]
and confirm with
and confirm with
ENTER.
!
Use
and to change Time and Date.
!
Confirm the change with
ENTER.
Automatically setting the clock
!
Select Clock and confirm with
ENTER.
!
Use to switch automatic mode to [On]
and confirm with
and confirm with
ENTER.
The automatic setting of the clock begins.
If the date and time are not transmitted by the television station, they must be set manually.
Mind that a wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
Mind that a wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
All settings except for the security levels with associated password and the time settings
are reset to their factory settings.
are reset to their factory settings.
All settings except for the programmed channels, time, country, language and disc-
language settings, the security levels including password and the remote-control code
are reset to the factory settings.
language settings, the security levels including password and the remote-control code
are reset to the factory settings.
[ON] [Off]
On: Power save function in standby mode.
The brightness of the display field cannot be changed in power save mode. The quick
start setting is set to [Off].
If you want to use an external unit via Scart connector AV2, the DVD Recorder must
switched back out of standby mode.
start setting is set to [Off].
If you want to use an external unit via Scart connector AV2, the DVD Recorder must
switched back out of standby mode.
Off: The brightness of the display field can be changed.
Select the desired language for the menus and the On-Screen Messages.
[ON] [Off]
On: The device is ready for use from standby mode after approx. 2 seconds.
Standby mode uses more power and Power Save is set to [Off].
Starting automatic setting on the unit
The unit must be switched on and must be in
stop mode.
The unit must be switched on and must be in
stop mode.
!
Press and hold
CH and CH on the unit
until the Country menu appears.
All settings except for password, time and
security level will be reset to the factory default
settings.
The timer recording programmes will also be
erased.
security level will be reset to the factory default
settings.
The timer recording programmes will also be
erased.
HDD
DVD