Panasonic DMREH80V Operating Guide

AUDIO IN

Audio cable

Red/R

White/L

Amplifier (example)

In order to enjoy stereo or Dolby Pro Logic, connect the appropriate amplifier
or an analogue audio component.

Connect the analogue output (L/R) e.g. to a Dolby Pro Logic amplifier.

As described, connect the Audio cable according to the colours and markings
of the connection sockets (white/L, red/R).

External devices

Connecting an analogue amplifier or an analogue system component

= Extra equipment for the connections shown

Connect this unit to a device with
a DTS decoder in order to be able
to play DVDs with this symbol.

This device can playback stereo
sound in Dolby Digital (2 channels).

Connect an amplifier with built-in Dolby Digital
decoder in order to be able to enjoy Surround
Sound.

Amplifier (example)

OPTICAL

Optical digital

audio cable

Push the jack all the
way into the socket
with this side facing up

Connecting a digital amplifier or a digital system component

Connect an amplifier with a Dolby Digital-, DTS- or MPEG decoder.

Use an Optical digital audio cable.

In the Sound SETUP menu, change the [Digital Audio Output] setting
according to your connected digital amplifier.

You cannot use DTS Digital Surround decoders that are not suitable for DVD.

104

Before you connect the cable, make sure that the power to both devices is turned off.
After you have connected the cables, switch both devices on.

If an amplifier equipped with a Dolby Digital, DTS or MPEG decoder is connected,

multi-channel surround sound from a DVD-Video disc can be played back.

DVD-V