Panasonic DMREH80V Operating Guide
47
Playback
SKIP/INDEX
VHS index search system (VISS)
This unit records special index signals with each recording.
The index search function uses these signals. Thus, you can
quickly find the beginning of a desired recording.
You can search for up to 20 index signals.
The index search function uses these signals. Thus, you can
quickly find the beginning of a desired recording.
You can search for up to 20 index signals.
!
Press INDEX during normal playback or in stop mode.
tape forwards /
tape rewinds.
The unit automatically begins playback when the index signal
is found.
The number of jumps increases with each press of the button.
is found.
The number of jumps increases with each press of the button.
!
Press STOP to end the search.
S-VHS Quasi Playback (SQPB)
It is possible to playback cassettes that were recorded on an
S-VHS unit. The picture quality is similar to a VHS recording.
Depending on the video tape used, slight image distortions
can occur. An S-VHS recording is not possible with this unit.
S-VHS unit. The picture quality is similar to a VHS recording.
Depending on the video tape used, slight image distortions
can occur. An S-VHS recording is not possible with this unit.
VHS playback with high picture quality
You can play video cassettes in a high picture quality via the
TP channel (copy input channel) in progressive or RGB mode.
The television must be RGB- or progressive-capable.
TP channel (copy input channel) in progressive or RGB mode.
The television must be RGB- or progressive-capable.
!
Press DVD/HDD and use CH , to select the TP channel.
!
Press VHS and then PLAY . Playback begins.
If the index signals are too close together, this function may not
work. Thus, the recordings should be at least 5 minutes long.
work. Thus, the recordings should be at least 5 minutes long.
Setting the track position manually
The unit automatically sets the track position. If a cassette was
recorded on another unit, it may be necessary to set the track
position manually if you experience distortions.
The unit automatically sets the track position. If a cassette was
recorded on another unit, it may be necessary to set the track
position manually if you experience distortions.
The picture is noisy or unclear during playback.
!
During normal or slow-motion playback,
press TRACKING/V-LOCK + / -, until
the noise disappears.
If the still picture is noisy, first switch
the unit to slow-motion and then set the
track position.
press TRACKING/V-LOCK + / -, until
the noise disappears.
If the still picture is noisy, first switch
the unit to slow-motion and then set the
track position.
With some televisions, the picture can be displaced up or down
during some special playback functions.
These are not functional problems.
during some special playback functions.
These are not functional problems.
Some video cassettes do not allow the
track position to be controlled.
This is not a functional problem.
track position to be controlled.
This is not a functional problem.
Control the track position automatically
!
Press TRACKING/V-LOCK + and - simultaneously to go back
to automatic tracking.
to automatic tracking.