Panasonic DMR-EH75V Operating Guide

The unit usually makes tracking adjustments, but you may need to 
do it manually if noise appears on a tape recorded on other 
equipment.

r] or 

s].

Repeat until the noise disappears. 

Adjust the vertical synchronization to stop the picture from jiggling 
while paused.
This works only while VHS is paused during recording on the DVD.

r] or 

s].

Repeat until the jiggling stops.

∫ To return to auto tracking

Press both [TRACKING/V-LOCK, 

r] and [TRACKING/V-LOCK, s] 

simultaneously.

∫ To remove the noise from a paused picture

Start slow play, then adjust the tracking.

Note
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with 

[CH, 

W, X] on the main unit.

The unit automatically records special index signals on the tape 
every time a recording is started. The index search function makes 
use of these index signals to let you find the beginning of a desired 
program quickly and easily.

Preparation
≥Insert a recorded video cassette. (

:] or [9].

≥Each press increases the number of skips.

∫ To cancel the index search

Press [

∫, STOP].

Note
≥Up to 20 index signals can be searched for in both directions.
≥If you press either one of the buttons too much, you can control the 

number of skips by pressing the opposite button.

≥The figure on the display decreases by 1 each time an index signal 

is located.

≥This feature may not work correctly if the index signals are too 

close together. Make recordings of at least 5 minutes.

The audio changes as follows:

Stereo 

> Mono L > Mono R > No display (Normal audio track)

       

^------------------------------------------------------------}

When a stereo broadcast or SAP broadcast is recorded and played 
back on the unit, stereo sound will be automatically selected in the 
case of a stereo broadcast and SAP sound will be automatically 
selected in the case of a dual-sound broadcast (Mono and SAP or 
Stereo and SAP). 
≥This function may not work properly if the program is played back 

from a mid point. In a case like this, press [AUDIO] and select the 
right sound. 

≥The function will not work with a cassette which has been recorded 

using external equipment. 

It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is 

capable of.

≥It is not possible to record in the S-VHS system with the unit.

∫  Manual tracking

∫  Vertical locking adjustment

∫ Index signals are recorded in the following cases.

≥When a recording is started by pressing [¥, REC].

C

6  12

VHS cassette

M6740P.book  49 ページ  ２００６年１月３０日　月曜日　午後３時３０分