Panasonic PV-D4762 Operating Guide
34
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Index Search
Note
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
counted in the search.
1
2
Tape Operation
Search System
For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.
information are also included for timer recordings. These marks are used to access or
scan recordings.
1
Program End Search
2
Fig. 1
Fig. 2
Fig. 3
Note
Locates end point of recording for continuity.
Examples of Program End Search.
If search exceeds
a few seconds in
BLANK area.
a few seconds in
BLANK area.
➛
➛
➛
➛
➛ search continues 7 sec. past end point,
➛
➛
➛
➛
➛ tape rewinds to 10 sec. before end point,
➛
➛
➛
➛
➛ tape plays to end point and stops.
Upon locating end point,
• If Program End Search is started very close to
an index mark, that mark may be skipped over.
PROGRAM END SEARCH
SEARCH START : FF
EXIT :SEARCH
Program 2 or BLANK
Program 1
the current tape position
Press SEARCH button
Press SEARCH button
FF
INDEX
End Point
Program 2
Program 1
the current tape position
Press SEARCH button
Press SEARCH button
INDEX
INDEX
BLANK
BLANK
FF
End Point
Program 2
Program 1
the current tape position
Press SEARCH button
Press SEARCH button
BLANK
INDEX
FF
End Point
INDEX SEARCH
ENTER INDEX NUMBER :1
USING 1- 9 KEYS
USING 1- 9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCH/ M/A
EXIT :STOP
REVERSE SEARCH :REW
NEXT :SEARCH/ M/A
EXIT :STOP
INDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
REVERSE SEARCH : REW
Press SEARCH/
M/A SKIP*
to display SEARCH
in Stop or Play
mode, and then
press NUMBER
keys
to select recording
number.
M/A SKIP*
to display SEARCH
in Stop or Play
mode, and then
press NUMBER
keys
to select recording
number.
• To calculate
number, see below.
Press FF/SLOW+
or REW/SLOW- on
the remote to start
search.
or REW/SLOW- on
the remote to start
search.
Press SEARCH/ M/A SKIP twice
to display SEARCH in Stop or Play
mode.
to display SEARCH in Stop or Play
mode.
Press FF/SLOW+
on the remote to
start PROGRAM
END SEARCH.
on the remote to
start PROGRAM
END SEARCH.
• To cancel, press
PLAY or STOP.
Play begins at
search end.
To search forward
or back 1 index,
press FF/SLOW+ or
REW/SLOW- on the
remote while
screen left is
displayed (10 sec.).
search end.
To search forward
or back 1 index,
press FF/SLOW+ or
REW/SLOW- on the
remote while
screen left is
displayed (10 sec.).
• To cancel, press
PLAY or STOP.
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: indicates start points of each recording.
6
1
5
7
2
3
4
1
7
5
3
4
6
2
PV-D4762 P26-39 (2nd) [LSQT0525B].p65
2002/05/23, 18:21
34