Panasonic NVVP32EE Operating Guide

Operations

To Enjoy Movies and Music More

ª Manual Zoom

During play,

..........................................................................................................................................................................................................................................................................................................................................

[1] Press [DISPLAY] and press [

34] to select “Other Settings”.

[2] Press [

1] then [34] to select “Display Menu” and press

[ENTER].

[3] Press [

34] to select “Manual Zoom” and press [ 1].

[4] Press [

34] to adjust.

The ratio changes in 0.01 units between 1.00 and 1.60 and in 0.02 units between 1.60 and 2.00.

Notes:
≥The ratio automatically will return to 1.00 when you open the disc tray, change the source or turn off the

unit.

≥Refer to the disc’s instructions and “Variety of screen sizes” (

l 36) for the aspect ratio of the picture.

[DVD-V[
When you have connected equipment through this unit’s OPTICAL DIGITAL AUDIO terminal (

l 9),

change the settings for “PCM Digital Output”, “Dolby Digital”, “DTS Digital Surround” and “MPEG” (

l 41).

You can enjoy the powerful movie theater and hall-like sound.

[1] Press [SETUP].

[2] Press [

34] to select “Audio”.

[3] Press [

1] then [34] to select the item (

l below).

[4] Press [ENTER] and then [SETUP] to end the settings.

Check the digital input limitations of the equipment you connect using COAXIAL terminal and select the
maximum sampling frequency of PCM digital output.

Up to 48 kHz (Initial setting) : When connected to equipment compatible with 44.1 or 48 kHz
Up to 96 kHz

: When connected to equipment compatible with 88.2 or 96 kHz

Notes:
≥Signals from copy-protected discs are converted to 48 or 44.1 kHz.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz.

Read your equipment’s operating instructions for details.

Bitstream (Initial setting for Dolby Digital):
Select if the equipment you connected can decode the signal.

PCM (Initial setting for DTS Digital Surround and MPEG):
Select if the equipment you connected cannot decode the signal.

IMPORTANT
Select “Bitstream” when the equipment can decode the bitstream (digital form of multi-channel data).
Otherwise, select “PCM”.

to select and

ress

Display Menu

to exit

ENTER

RETURN

Title

Play Menu
Picture Menu
Audio Menu

Display Menu

Chapter
Time

0:02:36

Audio

1 English

Other Settin

1 / 2
1 / 1

Subtitle
Angle

Off

1 / 1

Play Speed
AV Enhancer

to set

Manual Zoom

1.00

to exit

RETURN

Subtitle Position
Subtitle Brightness
Just Fit Zoom

Manual Zoom

1.00

GUI Brightness

0
0

Bitrate Display
GUI See-through

Off
Off

1.00

e.g.

[DVD-V[

Digital output

PCM Digital Output

Dolby Digital, DTS Digital Surround and MPEG

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.

Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 and other U.S. and world-wide patents issued and
pending. “DTS” and “DTS 2.0+Digital Out” are trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems, Inc. All rights reserved.

DVD Setup

Disc

Video

Audio

Display

Others

to select and press

to exit

ENTER

RETURN

PCM Di

ital Out

to 48 kHz

DTS Digital Surround

PCM

MPEG

PCM

Off

Audio durin

namic Ran

e Com

ression

Dolby Digital

Bistream

VP32EE.book 37 ページ２００４年６月１１日　金曜日　午後４時４０分