Panasonic DMR-ES30V Operating Guide
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-Setup
automatically. In this case you can re-start Auto-Setup again. See page 72.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 72.
automatically. In this case you can re-start Auto-Setup again. See page 72.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 72.
!
Press
to set the correct time and date and press ENTER to finish this setting.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
(Auto clock set was not possible due to a weak signal)
Mind that a wrong date or time will influence the programmed recording of TV
programmes (don't forget to change summer time and winter time).
programmes (don't forget to change summer time and winter time).
Setup without Q-Link
(Automatic Tuning)
!
!
!
With the Stand-by/on switch turn on the DVD Recorder.
Automatic tuning for all available TV stations begins.
Approximate duration is 5 minutes.
Automatic tuning for all available TV stations begins.
Approximate duration is 5 minutes.
!
After Automatic tuning has finished, press RETURN.
The Owner ID screen will appear.
The Owner ID screen will appear.
Switch on your television and select the AV channel.
The automatic setup saves all available TV stations. If the station also broadcasts date
and time, then the clock is also set automatically.
and time, then the clock is also set automatically.
Auto-Setup
17
Auto-Setup
Ch
4
Suche Sender, bitte warten.
RETURN: abbrechen
RETURN: abbrechen
35
Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
Clock
Off
Automatic
0
00
00
1
1
2005
:
:
.
.
Time
Date
CHANGE
ENTER
RETURN
Clock cannot be set automatically.
Please set the clock manually.
ENTER: store RETURN: leave
SELECT
0
9
No
You can complete the Owner ID now or skip this step and do it later. To do it later, press
the RETURN button. Your DVD Recorder is now ready to use.
the RETURN button. Your DVD Recorder is now ready to use.
!
To set the Owner ID now, use and press the Numeric buttons or
to enter a
four-digit PIN number. Press , to correct the digit.
!
Make sure that you will remember the PIN number (make a note of it).
!
Press the ENTER button twice to confirm.
!
Enter the [Name], [House No] and [Postcode] in the same way, using
.
!
Press the ENTER button to confirm each entry.
!
Press the RETURN button to leave the Owner ID screen.
!
You will now see the TV picture. Your DVD Recorder is now ready to use.
Owner ID
Owner ID
RETURN
Name
House No.
Postcode
PIN number
* * * *
RETURN : leave
* * * * * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *