Panasonic DMR-ES30V Operating Guide

Removing Interference / Changing RF output channel

In some cases, interference (lines or patterning) or a very poor picture may appear on
the TV when the DVD Recorder is connected. If this happens, follow the steps below to
change the video playback channel (RF output channel) to remove the interference.

Press the FUNCTIONS button for more than 5 seconds. The RF
output channel number is displayed on the DVD display.

Press ENTER to finish this setting.

Press the Numeric buttons or use the Channel (CH) button to
select a channel number, which differs by 2 or 3 from the present
channel number. (For example, if the original channel number was
28, enter 31.)

(RF OFF)

...

Retune your TV until you receive the Test pattern. It may be necessary
to repeat steps above until you can see the Test pattern clearly.
If using a Scart cable please see the note below.

Press

for about 5 seconds. The preset channel will be displayed on the

DVD display.

Press channel select buttons CH or 0 to invoke [- -].

Confirm with ENTER.

FUNCTIONS

Set the RF output channel of the DVD Recorder to [- -] (RF OFF) if the DVD Recorder is
connected to the TV via the 21-pin Scart cable.

FUNCTIONS

TRACKING/V-LOCK

TV screen

The picture with interference

On-Screen Display

Test pattern indication

The clear picture

DVD display

Indication when the RF output

channel is 21 (example)

Indication after changing the RF

output channel to 31 (example)

Test pattern indication

SELECT

ENTER

RETURN

RF OUTPUT CHANNEL

CH:

DVD