Panasonic DMR-ES30V Operating Guide

Off

M1

Off

Bitstream

Bitstream

Ext Link 1

PCM

DVD

If you want to record programmes on Discs that were broadcast in dual channel tone, you 
can choose between the original language [M 1] or another available language [M 2]. 
If you are copying from an external source or a tape position to Discs, select the sound 
track on the other unit.

Select the appropriate setting if an external unit is connected 
to the DIGITAL AUDIO OUT of the DVD recorder.

On: The level of quiet sections is increased and the level of loud sections is 
decreased. The sound is still clearly audible when the volume is decreased.

Bitstream: The connected unit can decode the corresponding signal.

PCM: If the connected unit cannot decode the corresponding signal, the setting must be 
switched to [PCM]. Otherwise, strong noise can cause damage to hearing or 
loudspeakers.
Perform settings based on your audio system.

ON: The connected unit cannot process signals with a scan frequency of 96 kHz or 
88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz.

Off: The connected unit can process signals with a scan frequeny of 96 kHz or 88.2 kHz. 

Signals are output as 96 kHz or 88.2 kHz.

[ON] [Off]
Select the audio output mode at a scanning frequency of 96 kHz or 88.2 kHz. Despite this 
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scanning frequency of 
more than 96 kHz or 88.2 kHz or a disc is copy-protected. 

  

 

 

 

 

To Others