Panasonic DP-C406 Operating Guide
Chapter 2 Netw
ork Configuration
4
2Network Configuration
Setting up the Network Configuration
Follow the procedure below if your network is not configured with the DHCP server, and the TCP/IP
parameters must be set up manually.
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
parameters must be set up manually.
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
z
Before executing the procedures described below, make sure the Printer On Line LED is lit.
1
Press the Function key.
z
Wait until the Printer On Line LED lights up
before pressing the Function key.
before pressing the Function key.
2
Select “Network Settings”.
3
Enter the Key Operator password (8
digits), and then select “OK”.
digits), and then select “OK”.
z
The default password is “00000000”.
To change the password, select “85 Key
Operator Password” in the General
Settings (Key Operator Mode), and then
enter the new password.
To change the password, select “85 Key
Operator Password” in the General
Settings (Key Operator Mode), and then
enter the new password.
z
To correct a mistake, select “Back Space” to
delete, and enter the correct character.
delete, and enter the correct character.
4
Select “01 General”.
Function key
Printer On Line LED
1
2