Panasonic KX-TD816E User Manual
User Programming (Manager Programming)
3-9
3.2
User Programming (Manager Programming)
System Speed Dialling Number Set
001
Description
Used to program the System Speed Dial numbers. These numbers are
available to all extension users. The stored numbers are also applied to
CO Incoming Call Information Display / Log features.
available to all extension users. The stored numbers are also applied to
CO Incoming Call Information Display / Log features.
Selection
• Speed dial number: 000 through 499
• Telephone number: 24 digits (max.)
Default
All speed dial numbers – Not stored
Programming
1.
Enter 001.
Display: SPD Number Set
2.
Press NEXT.
Display: SPD-Code?
→
3.
Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000: Not Stored
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another speed dial number, press NEXT or PREV, or
SELECT and the desired speed dial number.
SELECT and the desired speed dial number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 500 speed dial numbers. Each speed dial
number has a maximum of 24 digits. The valid characters are 0
through 9,
through 9,
, and # keys, RECALL or FLASH, PAUSE,
SECRET and – (hyphen) buttons.
– To store the register recall signal, press RECALL or FLASH.
Note : The stored recall will be in effect only during a call.
(Refer to the Installation Manual, Section 3 “External
Feature Access.”)
Feature Access.”)
– To store a hyphen, press the “–” button.
– To store a pause, press PAUSE.
(Refer to the Installation Manual, Section 3 “Pause Insertion,
Automatic.”)
Automatic.”)