Panasonic KX-TD816E User Manual

5-60

The PS does not work. 

The PS does not operate.

The PS does not ring.

You cannot dial.

Static, sound cuts in/out, fades. 
Interference from other electrical units.   

“

CS Busy

” is displayed.

“

PS NOT CONNECTED

” is displayed.

You cannot store a phone number and
name in the directory.

The alarm sounds after pressing

(Redial)

.

“

” flashes or beeps tones sound

every 5 seconds during a conversation.

You charged the batteries fully,
but “

” flashes.

• The battery is empty.  Charge the batteries fully (p. 5-8).
• The PS has been cancelled or the PS has not been regis-

tered.  To register the PS, please consult with your dealer.

• The power switch is OFF (❍).  Turn it ON (●).

• Ringer volume is set to OFF or VIBRATION.
• The PS is out of range or the Cell Station (CS) is busy.
• The radio channel is busy or a radio communication

error occurred.  Try again later.

• The number which you dialled is restricted by the sys-

tem.  

• The key lock mode is set.  To cancel the mode,

press

(Function) for about 2 seconds.

• The radio channel is busy or a radio communication

error occurred.  Try again later.

• Set the PS and CS away from other electrical appli-

ances.

• Move closer to the CS.

• The Cell Station is busy.  Try again later.

• The power switch is set to OFF.
• The PS is out of range.
• The radio channel is busy or a radio communication

error occurred.  Try again later.

• Your entry exceeds the maximum digits or characters.
• Do not pause for over 30 seconds while programming.

• A number is not saved in the Call Log.

• The battery is low.  Charge the batteries fully (p. 5-8).

• Clean the charge contacts and charge again.  
• It is time to change the batteries. Please purchase new

batteries.