Panasonic KX-TD816E User Manual

2-2

Station Programming allows you, the proprietary telephone (PT) user, to program certain
features from your telephone individually.  To program, you need to switch your
telephone to the Station Programming mode.  And during the programming mode, your
telephone is put in a busy condition to outside caller.  If you want to make a normal call
handling operation, you should finish the programming mode.

When you enter the Station Programming mode, the display shows the following message
as the initial programming mode;

And the display gives you the helpful or stored data information related to your
programming steps.  In this section, we note the display example at the programming
steps if required.  You can also refer to “Display Examples” in the Appendix (Section 9).

1. Press the PROGRAM button.

2. Dial 99.

• If 99 is not dialled within 5 seconds of pressing the

PROGRAM button, the Station Programming mode is
cancelled.

• The display shows:

(— initial programming
display)

• The STORE indicator light turns on.

• If there is no operational entry for one minute, the Station

Programming mode is cancelled.  Normal call handling
resumes.

1. Press the PROGRAM button or lift the handset.

• Programming is completed and normal call handling

resumes.

• If you go off-hook while programming, the mode is

cancelled and the normal call handling resumes.

1

2

1

or

PROGRAM

PROGRAM

PT-PGM Mode

PT-PGM Mode