Panasonic sc-ht340 Operating Guide

Page of 40
ENGLISH
ENGLISH
ENGLISH
33
RQT8043
RQT8732
REFERENCE
Troubleshooting guide
Troubleshoot
 Power
 
Page
No power.
• Insert the AC mains lead securely.
8
The unit is automatically
switched to the standby 
mode.
• The Sleep timer was working and had reached the set time limit.
12
 Unresponsive or inoperable function
No response when any 
buttons are pressed.
• This unit cannot play discs other than the ones listed in these 
operating instructions.
• The unit may not be operating properly due to lightning, static 
electricity or some other external factor. Turn the unit off and then 
back to on. Alternatively, turn the unit off, disconnect the AC mains 
lead, and then reconnect it.
• Condensation has formed: Wait 1 to 2 hours for it to evaporate.
11
No response when remote 
control buttons are pressed.
• Check that the batteries are installed correctly.
• The batteries are depleted. Replace them with new ones.
• Aim the remote control at the display and operate.
6
6
12
No picture or sound.
• Check the video or speaker connection.
• Check the power or input setting of the connected equipment and 
the main unit.
• Check that the disc has something recorded on it.
8, 9
You have forgotten your 
ratings password.
Reset all the settings to 
Factory Preset.
• While stopped and “DVD/CD” is the source, press and hold [
7] 
on the main unit and [
h10] on the remote control until “Initialised” 
disappears from the television. Turn the unit off and on again.
  All settings will return to the default values.
 Specifi c operation undesirable or unexpected
It takes time before play 
starts.
• Play may take time to begin when an MP3 track has still picture 
data. Even after the track starts, the correct play time will not be 
displayed. This is normal. 
• This is normal on DivX video. 
Folders on a data CD are not 
displayed correctly. 
 
 
 
 
• Folders deeper than the eighth layer are displayed as the eighth 
layer.
A menu screen appears 
during skip or search. 
• This is normal for Video CDs.
Playback control menu 
does not appear. 
 with 
playback control
• Press [
7, STOP] twice and then press [3, PLAY].
The program and random 
play functions do not work. 
• These functions do not work with some DVD-Videos.
Programmed items are not 
played. 
• Some items cannot be played even if you have programmed them.
Play does not start.
• This unit may not play WMA and MPEG4 that contains still picture 
data.
• If playing DivX VOD content, refer to the homepage where you 
purchased the DivX VOD content. (Example: www.divx.com/vod) 
• If a disc contains CD-DA and other formats, proper playback may 
not be possible.
Scenes are skipped 
intermittently. 
 
• If you change the volume or sound effects during Advanced Disc 
Review, the function continues without the on-screen display. 
Cancel the function.
20
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if 
the solutions indicated in the chart do not solve the problem, consult your dealer for instructions.
RQT8732-BUK.indd   33
RQT8732-BUK.indd   33
4/11/06   7:19:12 PM
4/11/06   7:19:12 PM