Panasonic sc-ht340 Operating Guide

Page of 40
ENGLISH
ENGLISH
ENGLISH
37
RQT8043
RQT8732
REFERENCE
Glossary
Decoder
A decoder restores the coded audio signals on DVDs 
to normal. This is called decoding.
DivX
DivX is a popular media technology created by DivX, 
Inc. DivX media fi les contain highly compressed video 
with high visual quality that maintains a relatively 
small fi le size.
Dolby Digital
This is a method of coding digital signals developed 
by Dolby Laboratories. Apart from stereo (2-channel) 
audio, these signals can also be multi-channel audio. 
A large amount of audio information can be recorded 
on one disc using this method.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters 
around the world. There is good separation between 
the channels, so realistic sound effects are possible.
Dynamic range
Dynamic range is the difference between the lowest 
level of sound that can be heard above the noise of 
the equipment and the highest level of sound before 
distortion occurs.
Film and video
DVD-Videos are recorded using either fi lm or video. 
This unit can determine which type has been used, 
then uses the most suitable method of progressive 
output.
Film:  Recorded at 25 frames per second (PAL discs) 
or 24 frames per second (NTSC discs). (NTSC 
discs recorded at 30 frames per second as 
well). Generally appropriate for motion picture 
fi lms.
Video: Recorded at 25 frames/50 fi elds per second 
(PAL discs) or 30 frames/60 fi elds per second 
(NTSC discs). Generally appropriate for TV 
drama programs or animation.
Frame still and fi eld still
Frames are the still pictures that go together to make 
a moving picture.
There are about 30 frames shown each second.
One frame is made up of two fi elds. A regular 
television shows these fi elds one after the other to 
create frames.
A still is shown when you pause a moving picture. 
A frame still is made up of two alternating fi elds, so 
the picture may appear blurred, but overall quality is 
high.
A fi eld still is not blurred, but it has only half the 
information of a frame still so picture quality is lower.
I/P/B
MPEG 2, the video compression standard adopted 
for use with DVD-Video, codes frames using these 3 
picture types.
I:  Intra coded picture
 
This picture has the best quality and is the best to 
use when adjusting the picture.
P:  Predictive coded picture
 
This picture is calculated based on past I or P-
pictures.
B:  Bidirectionally-predictive coded picture
 
This picture is calculated by comparing past and 
future I and P-pictures so it has the lowest volume 
of information.
JPEG (Joint Photographic Experts Group)
This is a system used for compressing/decoding color 
still pictures. If you select JPEG as the storage system 
on digital cameras, etc., the data will be compressed 
to 1/10–1/100 of its original size. The benefi t of JPEG 
is less deterioration in picture quality considering the 
degree of compression.
Linear PCM (Pulse Code Modulation)
These are uncompressed digital signals, similar to 
those found on CDs.
MP3 (MPEG Audio Layer 3)
An audio compression method that compresses audio 
to approximately one tenth of its size without any 
considerable loss of audio quality.
MPEG4
A compression system for use on mobile devices or 
a network, that allows highly effi cient recording at a 
low bit rate.
Playback control (PBC)
If a Video CD has playback control, you can select 
scenes and information with menus.
Sampling frequency
Sampling is the process of converting the heights 
of sound wave (analog signal) samples taken at set 
periods into digits (digital encoding).
Sampling frequency is the number of samples taken 
per second, so larger numbers mean more faithful 
reproduction of the original sound.
WMA (Windows Media
TM
 Audio)
WMA is a compression format developed by Microsoft 
Corporation. It achieves the same sound quality as 
MP3 with a fi le size that is smaller than that of MP3.
RQT8732-BUK.indd   37
RQT8732-BUK.indd   37
4/11/06   7:19:16 PM
4/11/06   7:19:16 PM