Panasonic RPBTS30E Operating Guide

Panasonic bears no responsibility for data and/or information that is 

compromised during a wireless transmission.

■

This unit uses the 2.4 GHz frequency band.

■

 •This unit conforms to frequency restrictions and has received certification 

based on frequency laws. Thus, a wireless permit is not necessary.

 •The actions below are punishable by law in some countries: 

– Taking apart/modifying the unit. 

–  Removing specification indications.

■

 •Wireless transmission and/or usage with all Bluetooth

 equipped devices is 

not guaranteed.

 •All devices must conform to standards set by Bluetooth SIG, Inc.

 •Depending on the specifications and settings of a device, it can fail to connect 

or some operations can be different.

 •This system supports Bluetooth

 security features. But depending on the 

operating environment and/or settings, this security may not be sufficient. 

Transmit data wirelessly to this system with caution.

 •This system cannot transmit data to a Bluetooth

 device.

■

Use this unit at a maximum range of 10 m.

The range can decrease depending on the environment, obstacles or 

interference.

■

 •This unit may not function properly and troubles such as noise and sound 

jumps may arise due to radio wave interference if this unit is located too close 

to other Bluetooth

 devices or the devices that use the 2.4 GHz band.

 •This unit may not function properly if radio waves from a nearby broadcasting 

station, etc. is too strong.

■

 •This unit is for normal, general use only.

 •Do not use this system near an equipment or in an environment that is 

sensitive to radio frequency interference (example: airports, hospitals, 

laboratories, etc).

■

DC 5 V, 500 mA

(Internal battery: 3.7 V (Li-polymer 

90 mAh))

Approx. 6 hours

Approx. 1.5 hours

10 ºC to 35 ºC

0 ºC to 40 ºC

35%RH to 80%RH (no condensation)

Approx. 20 g

IPX4 equivalent

*

 It may be shorter depending on the operating conditions.

*

 Time taken to recharge from empty to full.

■

Ver. 4.1

Wireless equipment classification Class 2 (2.5 mW)
Frequency band

2.4 GHz band FH-SS

A2DP, AVRCP, HSP, HFP

SBC

Up to 10 m

■

9 mm

■

DC 5 V, 500 mA

■

Mono

■

0.1 m

 

●

Specifications are subject to change without notice.