Panasonic NVGS6GC Operating Guide
Record mode
57
LSQT0945
Check the recording
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick during the recording
pause until the icon
pause until the icon
1 appears.
2
Move the joystick down to select the
recording check icon [
recording check icon [
].
Blank search function
Searches for the last part of the image recorded
(unused part of the tape).
≥Set to Tape Recording Mode.
(unused part of the tape).
≥Set to Tape Recording Mode.
1
Set [BASIC] >> [BLANK SEARCH] >> [YES].
ª
Stopping blank search midway
through
through
Move the joystick down.
≥If the cassette tape has no blank part, then the
camera will stop at the end of the tape.
≥The camera stops at a point approx. 1 second
before the end of the last image recorded.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
Zoom in/out function
You can zoom in up to 20
k optically.
≥Set to Tape Recording Mode.
1
Wide-angle recording (zoom out):
Push the [W/T] lever towards [W].
Close-up recording (zoom in):
Push the [W/T] lever towards [T].
Push the [W/T] lever towards [W].
Close-up recording (zoom in):
Push the [W/T] lever towards [T].
≥When zooming in and taking a picture while
holding the movie camera by hand, we
recommend using the image stabilizer function.
recommend using the image stabilizer function.
≥When you are zooming on a faraway subject, a
sharper focus is achieved if the recording
subject is 1.2 metres or further from the movie
camera.
subject is 1.2 metres or further from the movie
camera.
≥When the zoom speed is high, the subject may
not be focused easily.
≥When the zoom magnification is 1k, the movie
camera can focus on a subject approx. 2 cm
distant from the lens.
distant from the lens.
ª
Digital zoom function
If the zoom magnification exceeds 20 times
, then
the digital zoom function will be activated. The
digital zoom function allows you to select a
magnification from 50
digital zoom function allows you to select a
magnification from 50
k to 800k.
1
Set [ADVANCE] >> [D.ZOOM] >> [50
k] or
[800
k].
[OFF]:
Optical zoom only (Up to 20
k)
[50
k]:
Up to 50
k
[800
k]: Up to 800k
≥The larger the digital zoom magnification, the
more the image quality is degraded.
1
VOL
W
T
1
tW
12
tW
20
tW
T
T
T
50
tW
T
GS6GC_ENG.book 57 ページ ２００５年３月１日 火曜日 午後１時４０分