Panasonic NVGS6GC Operating Guide

Before using

LSQT0945

≥After using, make sure to rewind the cassette 

completely, remove it, and put it in a case. Store 
the case in an upright position. (

) 

≥When condensation is formed on the lens or the 

main unit of the movie camera, even if no 
condensation alarm is indicated, condensation 
may have formed on the heads or the cassette 
tape. Do not open the cassette cover. (

) 

ª

≥Close the cassette cover completely, and then 

open it again completely.

≥Check if the battery has run down.
≥Check if the cassette compartment cover is in 

contact with grip belt as shown below. If so, be 
sure the grip belt stays clear of the cover when 
opening.

ª

≥Set the [OFF/ON] switch to [OFF], then to [ON] 

again.

≥Check if the battery has run down.
ª

≥When the cassette holder is in action, do not 

touch anything except the [PUSH] mark.

≥When inserting a previously recorded cassette, 

use the blank search function to find the position 
where you want to continue recording. If you 
overwrite-record on a previously recorded 
cassette, be sure to find the position where you 
continue recording.

≥Close the cassette cover tightly.
≥When closing the cassette cover, do not get 

anything, such as a cable, caught in the cover.

ª

If the accidental erasure prevention slider 

1 of a 

cassette is opened (slide in the direction of the 
[SAVE] arrow), the cassette cannot be recorded. 
When recording, close the accidental erasure 
prevention slider of the cassette (slide in the 
direction of the [REC] arrow).

When the camera is turned on with the lens cap 
fitted, the automatic white balance adjustment 
may not function properly. Please turn the camera 
on after removing the lens cap.

ª

1, set the 

[OFF/ON] switch to [ON].
≥The power lamp lights up.

ª

1, set the 

[OFF/ON] switch to [OFF].
≥The power lamp goes off.

R E C

SAVE

1

OFF

ON

1

OFF

ON

1

GS6GC_ENG.book  49 ページ  ２００５年３月１日　火曜日　午後１時４０分