Panasonic DMREH60DEB Operating Guide
!
Press EXT LINK.
Standby mode for TIMER-controlled recordings is activated on the
selected drive. EXT Link lights up on the display.
Standby mode for TIMER-controlled recordings is activated on the
selected drive. EXT Link lights up on the display.
During standby mode, you can play HDD/DVD.
HDD
DVD
Tuning
Disc
Picture
Sound
Display
Disc
Picture
Sound
Display
SETUP
AV2 Input
Video
Ext Link 2
Ext
AV2 Settings
Ext Link 1
Ext Link 2
Ext Link
Ext Link
Ext Link 1
Connection
Others
The programmes (e.g. via a digital video unit) are recorded as one title.
A new chapter is created at each break in the picture and a playlist is automatically
created.
A new chapter is created at each break in the picture and a playlist is automatically
created.
!
To end the recording early, press STOP
.
!
Close the following message with ENTER or RETURN.
!
Pause the DV unit at the desired start position.
!
Press REC MODE to select recording mode.
!
Press FUNCTIONS.
!
Use
to select [To Others] and confirm with ENTER.
!
Use
to select [DV AUTO REC] and confirm with ENTER.
!
Confirm [REC] with ENTER. Recording begins.
!
If the recording ends automatically, confirm the message with ENTER.
DV AUTO REC
Cancel
Rec
Model of DV
Remain
Panasonic
NV--DX100
3:50(LP)
RETURN
SELECT
ENTER
DV AUTO REC
Recording finished.
RETURN
ENTER
DV AUTO REC
Status of DV unit has changed.
Finish recording.
RAM
HDD
Recording via DV input
HDD
DVD
-R
( )
-RW V +R
Start DV automatic recording ?
!
Select Audio Mode for DV Input before dubbing.
RETURN
ENTER
35
52
TIMER-controlled recordings
via external devices
!
Press FUNCTIONS, use
to select [To Others] and press ENTER.
!
Use
to select SETUP and press ENTER.
!
Use
to select Connection, ,
to select AV2 Settings and press ENTER.
!
Use
to select Ext Link and confirm with ENTER.
!
Use
to select [Ext Link 1] or [Ext Link 2] and confirm with ENTER.
Switch the remote control to HDD or DVD.
Before TIMER recordings via external devices
You control the recording function via an external device (e.g. receiver) using
EXT LINK. Connect the external device with a 21-pin Scart cable to the AV2 socket.
Adjust the Ext Link function for the connected device.
EXT LINK. Connect the external device with a 21-pin Scart cable to the AV2 socket.
Adjust the Ext Link function for the connected device.
If the television is connected to the AV1
connection via the 21-pin Scart cable, the
picture to be recorded appears on the screen.
The beginning of the recording may not be
recorded correctly in certain cases.
The Ext Link 2 setting cannot be used if the
input signal is in NTSC format.
connection via the 21-pin Scart cable, the
picture to be recorded appears on the screen.
The beginning of the recording may not be
recorded correctly in certain cases.
The Ext Link 2 setting cannot be used if the
input signal is in NTSC format.
Ext Link 1:
For digital receivers that send a special recording
control signal, e.g. SKY SATELLITE RECEIVER.
Ext Link 2:
External recording control for satellites or digital
receivers (video signal).
For digital receivers that send a special recording
control signal, e.g. SKY SATELLITE RECEIVER.
Ext Link 2:
External recording control for satellites or digital
receivers (video signal).
Switching off control via the external device
!
Press EXT LINK to end the recording or to switch off the standby mode for the
TIMER-controlled recording. The EXT Link display turns off.
TIMER-controlled recording. The EXT Link display turns off.
TIMER recordings via external devices (EXT LINK)
The programming of the recording must take place on the external device.
The recording begins when a corresponding signal is received from the connected
device. As long as a video picture is transmitted by the external device, the
selected element records it. Stop the transmission at the external device in order
to stop the recording.
The recording begins when a corresponding signal is received from the connected
device. As long as a video picture is transmitted by the external device, the
selected element records it. Stop the transmission at the external device in order
to stop the recording.
This unit cannot be controlled from a
connected DV unit.
The DV input of this unit is only intended
for DV units. (A computer etc. cannot be
connected.) The name of the DV unit may
not be displayed correctly.
Some DV units do not allow proper input
of the picture and sound signal.
The date and time information of the track
in the DV unit is not recorded.
Simultaneous recording and playback is
not possible.
connected DV unit.
The DV input of this unit is only intended
for DV units. (A computer etc. cannot be
connected.) The name of the DV unit may
not be displayed correctly.
Some DV units do not allow proper input
of the picture and sound signal.
The date and time information of the track
in the DV unit is not recorded.
Simultaneous recording and playback is
not possible.
Switch off this unit and the DV unit (e.g. digital camcorder) before you connect it to
the DV socket.
the DV socket.
!
Start the playback on your external DV unit.
!
Press Pause at the desired start position.
Manual recording via DV input
The recording cannot be stopped with PAUSE .
During recording or in standby mode for TIMER-controlled recording:
Playback is only possible from the unit selected for recording.
Playback is only possible from the unit selected for recording.
! Use INPUT SELECT to select the DV channel.
! Use REC MODE to select the recording mode.
! Press REC to start the recording and start playback on the external DV unit.
! Press STOP on the DV unit and on the DVD recorder to end playback.
! Use REC MODE to select the recording mode.
! Press REC to start the recording and start playback on the external DV unit.
! Press STOP on the DV unit and on the DVD recorder to end playback.
If you have activated the External Link standby mode, remote control functions such as the TV Guide
are not available.
are not available.