Panasonic dmr-e100h Operating Guide

∫ Advanced Operations

You can organize the recorded programme by erasing or other 
operation.
≥Check available cards (page 10).

Preparation
≥Release protection (disc 

# page 31, cartridge # page 64, 

card

# page 10).

≥Inset a disc or card (pages 13, 42)

[1]

 (page 23)

[2] Select “SD 

3, 4, 

2, 1] and 
press 
[ENTER].

[3] Check if “Input” is selected and press 

[4] Select the drive (HDD/DVD/SD CARD/

3, 4] and press 

[5] Use [

3, 4] to select a desired item 

ªTo stop it halfway

Press [RETURN].

[SD] [CARD] [HDD] [RAM]

[6] Use [

3, 4] 

[7] Press 

≥The picture is enlarged 

according to the display frame in this unit (320

k240). Therefore, 

the aspect ratio may differ from that of the original picture.

≥You can also select the programme by entering a 3-digit number 

with the numeric buttons.

≥When there are many folders on Mobile hard disk other than 

displayed, you can move to them with [

:, SKIP] or 

[

9, SKIP].

≥The recording date may differ from that of the original data.
≥In case of a TV station with Teletext information, the title of the 

TV programme is entered automatically, provided the “Title page” 
is correctly set. (page 58)

≥In case of a TV station with Teletext information, it may take over 

30 minutes to get the title or may fail to get.

The programme is not allowed to record by copy-guard.

t The programme cannot be played.

The audio cannot be output in this programme.

The title cannot be entered on this programme.

[SD] [HDD] [RAM]

[6] Select “Yes” with [

2] and press 

[7] Select “Start” with [

2] and press 

All MPEG4 programmes are erased.

For your reference
≥Keep pressing [RETURN] for 3 seconds or more to cancel. (The 

programmes are erased until this unit recognizes the 
cancellation.) 

≥When All erase is carried out, the files which are not compatible 

with this unit may be erased.

[SD]
To erase all of contents of the card or to use unformatted 
card.

[6] Select “Yes” with [

2] and press 

[7] Select “Start” with [

2] and press 

≥Formatting starts.

For your reference
≥Do not turn the unit off or disconnect the AC mains lead  

until the ending message (only in All Erase and SD Card 
format) appears. The card may be disabled.

≥Once erasing and formatting are carried out, materials including 

the data from a computer cannot be recovered. Check them 
carefully before proceeding. (When formatting in SD Card format 
programme protect is set on them, all programmes are erased 
even if they are protected.)

1 Play

3

3

The following 
operation is possible 
on the SD VIDEO 
(MPEG4) playback 
screen.
≥To stop: Press 

[

∫, STOP].

≥To pause: Press 

[

;, PAUSE].

≥For Fast forward or 

rewind (SEARCH): 
Press [

6, SLOW/

SEARCH] or [

5, 

SLOW/SEARCH].
- When pressing these buttons, only the time display goes 

forward or backward while a part of the SD VIDEO (MPEG4) 
is displayed as a still picture.

- There are 3 search speeds. Each press increases the search 

speed.

≥To skip: Press [:, SKIP] or [9, SKIP]. (page 15)
≥For manual skip: Press [MANUAL SKIP]. (page 16)
≥To erase: Press [ERASE], then select “Erase” with [2] and 

press [ENTER].

≥To dub: “One Touch Dubbing”, page 27.

PLAY

PRG 1

HDD

0:00.36

≥You can turn on and off the indication 

on the upper right of the screen by 
[STATUS].

1 Erase all programmes

1 Format SD CARD

DVD(PAL).book  47 ページ  ２００３年７月１６日 水曜日 午後３時２１分