Panasonic RQSX67V Operating Guide
8
7
HOLD
TAPE
∫
Hold function
This function prevents the unit from operating in error.
Use this function to prevent the following situations:
A: While not in use, playback or radio reception starts
Use this function to prevent the following situations:
A: While not in use, playback or radio reception starts
inadvertently and the battery runs out.
B: Playback or radio reception is interrupted while the
unit is in use.
When the cassette cover is closed
Tapeslack is wound automatically and playback will be
ready to start from the forward side.
Tapeslack is wound automatically and playback will be
ready to start from the forward side.
Auto-reverse
Unless manually stopped, the unit plays 3 sides of the
tape and then automatically stops.
Unless manually stopped, the unit plays 3 sides of the
tape and then automatically stops.
RADIO
∫
To obtain better reception
AM:
Try various directions to obtain optimum reception.
Try various directions to obtain optimum reception.
FM:
As the cord of the headphones acts as the FM antenna,
extend it as far as possible rather than leaving it coiled.
As the cord of the headphones acts as the FM antenna,
extend it as far as possible rather than leaving it coiled.
How to receive an FM broadcast clearly
Set [FM RECEPTION] to [NORMAL].
When FM reception is impaired or there is interference
from a powerful station, set it to [CITY].
Set [FM RECEPTION] to [NORMAL].
When FM reception is impaired or there is interference
from a powerful station, set it to [CITY].
NORMAL
CITY
FM RECEPTION
RADIO
Hold
Release
If a button is pressed during hold state
∫
Preset tuning
Frequencies of up to 30 radio stations (10 each for AM ,
FM1 and FM2) can be stored in the memory.
FM1 and FM2) can be stored in the memory.
Memory presetting
Preparation:
Preparation:
≥
Release hold.
≥
Connect the headphones (the cord of
the headphones acts as an FM antenna)
when storing frequencies of FM stations
in the memory.
the headphones acts as an FM antenna)
when storing frequencies of FM stations
in the memory.
Channel 1 - 5
1. Tune in a station to be stored.
2. Press [PRESET].
2. Press [PRESET].
“
” starts flashing.
3. Press and hold one of the memory buttons ([1] [2] [3]
[4] [5]) for 2 seconds while “
” is flashing.
3 beeps can be heard.
Channel 6 - 10
1. Tune in a station to be stored.
2. Press [PRESET] twice.
2. Press [PRESET] twice.
“
” and “
” start flashing.
3. Press and hold one of the memory buttons for 2 sec-
onds while “
” and “
” are flashing.
3 beeps can be heard.
To recall a preset station
Channel 1 - 5
1. Press [PRESET].
2. Press one of the memory buttons while “
2. Press one of the memory buttons while “
” is
flashing.
Channel 6 - 10
1. Press [PRESET] twice.
2. Press one of the memory buttons while “
2. Press one of the memory buttons while “
” and
“
” are flashing.
Note
Release the memory button within 2 seconds.
∫
When using overseas
The allocation settings according to the area are
needed.
Every time the following procedure is performed, the al-
location setting changes as follows:
needed.
Every time the following procedure is performed, the al-
location setting changes as follows:
FM 0.2 MHz, AM 10 kHz
(]
(original setting)
|
v
|
FM 0.1 MHz, AM 10 kHz
|
v
|
FM 0.05 MHz, AM 9 kHz
---}
How to adjust the allocation settings
While playing the radio
Press and hold [PRESET] for about 3 seconds.
While playing the radio
Press and hold [PRESET] for about 3 seconds.
≥
The changed allocation settings (FM and then AM)
are displayed.
are displayed.
Note
Changing allocation settings erases the stations stored
in memory .
in memory .
+5
M
M
+5
M
+5
M
M
M
Memory buttons
1
2
4
3
M
FM1
PRESET
5
Memory channel
Function
Stop
Reverse tape direction
Fast forward (FF) or rewind (REW)*
Function
Off
Other play methods
Troubleshooting Guide
TAPE PLAYBACK
You can use normal position type tapes only.
RADIO RECEPTION
Operation
During playback
During playback
Operation
During reception
*To switch to playback during FF, REW: Press [TAPE/
2 1
].
Before requesting service, make the below checks. If you are in doubt about some of the checkpoints, or if the remedies
indicated in the chart do not solve the problem, contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail
consumerproducts@panasonic.com, or web site (http://www.panasonic.com).
indicated in the chart do not solve the problem, contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail
consumerproducts@panasonic.com, or web site (http://www.panasonic.com).
6
5
OFF/
2
TAPE /
1
/ REW
/ FF
4
3
Press.
OFF/
2
Press.
Press.
Press.
BEFORE CALLING
PROBLEM
Radio operates but tape doesn’t.
No operations.
$
No sounds.
$
A gritty noise is heard.
CHECKPOINT
Is the battery worn?
$
Is the unit in the hold state?
$
Has the battery been installed with its polarities (
+
,
-
)
reversed?
$
Is the headphone plug firmly connected to the
Ë
jack?
$
Is the plug dirty? (Wipe away the dirt from the plug.)
Cannot hear music - too noisy.
Separate the unit from mobile phones.
$
No radio reception.
$
The FM frequency range is different.
Has the frequency step been set for your area?
TAPE /
1
OFF/
2
/ REW
/ FF
4
3