Panasonic DMWFL500E Operating Guide
14
VQT0Z62
Push the [MODE] button, and select the flash
mode. (P13)
≥ The flash working range is shown on the
mode. (P13)
≥ The flash working range is shown on the
display panel in line with the settings of the
digital camera.
digital camera.
A: Flash working range
1
Check that the distance to the
subject is within the flash
working range.
subject is within the flash
working range.
≥ If the subject is outside the range, adjust
the aperture of the lens or change the
distance to the subject.
distance to the subject.
≥ The flash working range changes
depending on the type and settings (ISO
sensitivity, aperture and focal length) of
the digital camera used.
sensitivity, aperture and focal length) of
the digital camera used.
2
Push the shutter button all the
way down, and take the picture.
way down, and take the picture.
3
Check that the [AUTO CHECK]
lamp is flashing.
lamp is flashing.
≥ If the [AUTO CHECK] lamp continues to
flash for about 5 seconds, it means that
the unit has fired successfully.
the unit has fired successfully.
[TTL AUTO]
A
AUTO
CHECK
CHECK
VQT0Z62.book 14 ページ 2006年6月22日 木曜日 午前11時46分