Panasonic DMWFL500E Operating Guide

Page of 148
25
VQT0Z62
≥ When the camera to subject distance is 0.5 m 
to 1.5 m, the light emitted from the flash will be 
skewed. For this reason, while holding down 
the bounce unlock button, point the flash head 
downward (7 degrees), and then take the 
picture.
Point the flash head down as far 
as it will go (7 degrees 
downward).
≥ [
] appears on the display panel.
≥ Vignetting may be caused by the light from the 
flash when the lens has a long overall length or 
a large diameter. Take a test photo first, and 
then take the picture.
≥ Use the flash in this way only for close-up 
photos. If you keep the flash head pointed 
down during regular photo taking, the light 
emitted from the flash at the top of the screen 
will be insufficient.
≥ The lighting angle can be adjusted manually.
Push the [ZOOM] button, and 
select the lighting angle.
A: Lighting angle
≥ [M ZOOM] appears on the display panel.
Any of the following ZOOM settings can be 
selected:
Each time the [ZOOM] button is pushed, the 
settings are selected in the following sequence:
≥ [AUTO ZOOM] can be used only when a digital 
camera with communication functions is used.
≥ When the wide panel is used,
any of the following settings can be selected: 
[AUTO ZOOM], [10 (20)] or [8 (16)].
≥ When a value higher than the focal length of 
the lens used is selected, the edges of the 
images will darken.
Taking pictures at close range
Selecting the lighting angle manually
12 mm, 14 mm, 17 mm, 25 mm, 35 mm, 42 mm
[With a 135 camera (35 mm film conversion): 
24 mm, 28 mm, 35 mm, 50 mm, 70 mm, 85 mm]
ZOOM
A
AUTO 
ZOOM
 12 
(24)
 14 
(28)
 25 
(50)
 17 
(35)
 35 
(70)
 42 
(85)
VQT0Z62.book  25 ページ  2006年6月22日 木曜日 午前11時46分