Panasonic DMWFL360E Operating Guide

Page of 196
10
VQT1B11
Remove the batteries from the 
unit when you do not intend to 
use the unit for a prolonged 
period.
Batteries may be hot immediately 
after the unit has been used. 
Before removing them from the 
unit, turn off the unit’s power and 
wait until the temperature of the 
batteries has dropped.
At low temperatures (under 
10 °C), the performance of 
batteries will deteriorate and the 
number of flashes fired by the 
unit will be sharply reduced. The 
operating duration of batteries 
tends to be shorter particularly 
when alkaline dry batteries are 
used so warm them in your 
pocket before use. When 
warming batteries in your pocket, 
avoid direct contact with cigarette 
lighters and other metal objects 
as well as with pocket/body 
warmers.
The number of flashes fired by 
the unit may also be sharply 
reduced if the 
+
 and 
-
 
electrodes of the batteries are 
exposed to oils from the skin or 
other forms of dirt. Before 
installing the batteries, wipe the 
+
 and 
-
 electrodes carefully 
using a soft, dry cloth.
If electrolytes should leak from the 
batteries, wipe away all traces of 
the electrolyte in the battery 
compartment, and then insert fresh 
batteries or fully charged nickel 
metal hydride batteries.
If you should get electrolyte on your 
hands or clothes, rinse it off 
thoroughly with water. If you should 
get electrolyte in your eyes, you risk 
losing your sight. In such a case, 
do not rub your eyes but 
immediately wash them with clean 
water, and then seek medical 
advice.
VQT1B11.book  10 ページ  2006年8月31日 木曜日 午後4時36分