Panasonic UF-6300 Operating Guide
Receiving Documents
74
If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically
starts receiving documents in its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
starts receiving documents in its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
The printing mechanism of the UF-6300/5300 features a Reverse Order Stacking construction. The UF-
6300/5300 has a Print Collation Mode that stacks received documents in the correct order. When the Print
Collation Mode is enabled, all received documents are stored into the memory first, and then printed out in
Correct Order Stacking.
The requirements for the Print Collation Mode to be active are:
6300/5300 has a Print Collation Mode that stacks received documents in the correct order. When the Print
Collation Mode is enabled, all received documents are stored into the memory first, and then printed out in
Correct Order Stacking.
The requirements for the Print Collation Mode to be active are:
1) Fax Parameter No. 65 (PRINT COLLATION) set to VALID (See page 39)
2) Sufficient remaining memory
2) Sufficient remaining memory
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements
is not met.
is not met.
NOTE
1. If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
2. If you wish to turn off the substitute reception function, change the setting of Fax Parameter
No.22 (SUBSTITUTE RCV) to "INVALID". (See page 37)
Substitute Memory Reception
1
When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.
there is no recording paper or toner, an Information Code
appears on the display.
NO RECORDING PAPER
INFO. CODE=010
OUT OF TONER
INFO. CODE=041
2
Install the recording paper (See page 20) or replace the
toner cartridge (See page 18).
toner cartridge (See page 18).
The machine will automatically start printing the document
stored in the memory.
stored in the memory.
* PRINTING *
MEMORY RCV’D DOC
Print Collation Mode
Sending Document Order
Stacking Document Order
3
2
1
Correct Order Stacking
(Collation Mode)
3
2
1
Reverse Order Stacking
(Non-Collation Mode)
1
2
3