Panasonic UF-6100 Operating Guide
2
The following trademarks and registered trademarks are used throughout this manual:
Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft
Corporation in the USA and other countries.
i386, i486 and Pentium are trademarks of Intel Corporation.
Centronics is a registered trademark of Centronics Data Computer Corporation.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.
TrueType is a registered trademark of Apple Computer, Inc.
Novell and NetWare are registered trademarks of Novell, Inc. in the USA and other countries.
All other trademarks identified herein are the property of their respective owners.
Corporation in the USA and other countries.
i386, i486 and Pentium are trademarks of Intel Corporation.
Centronics is a registered trademark of Centronics Data Computer Corporation.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.
TrueType is a registered trademark of Apple Computer, Inc.
Novell and NetWare are registered trademarks of Novell, Inc. in the USA and other countries.
All other trademarks identified herein are the property of their respective owners.
Copyright c 2005 by Panasonic Communications Co., Ltd.
All rights reserved. Unauthorized copying and distribution is a violation of law.
Published in Japan.
All rights reserved. Unauthorized copying and distribution is a violation of law.
Published in Japan.
The contents of these Operating Instructions are subject to change without notice.
Notification for UF-4000/4100/6000/6100
These models are designed with the Energy Conservation in mind, which will automatically
goes into the Sleep mode when it is not in use for a period of time (The factory default is 1
hour).
goes into the Sleep mode when it is not in use for a period of time (The factory default is 1
hour).
While the machine is in the Sleep mode, it will not automatically come out of Sleep mode when
a print command from a connected computer is sent. If you attempt to print a document from
your computer to the machine while it is in the Sleep mode, an error message "LPT1 write
error." will appears on your computer.
a print command from a connected computer is sent. If you attempt to print a document from
your computer to the machine while it is in the Sleep mode, an error message "LPT1 write
error." will appears on your computer.
Please press the ENERGY SAVER key on the control panel of the machine before starting a
print job from your computer.
If you wish to start printing at any time without having to press the ENERGY SAVER key to
come out of Sleep mode, you can change the setting of the Fax Parameter #34 from "3"
(SLEEP) to "2" (ENERGY-SAVER). This will stop the machine from switching into the Sleep
mode.
print job from your computer.
If you wish to start printing at any time without having to press the ENERGY SAVER key to
come out of Sleep mode, you can change the setting of the Fax Parameter #34 from "3"
(SLEEP) to "2" (ENERGY-SAVER). This will stop the machine from switching into the Sleep
mode.
Please refer to the machine's Operating Instructions (For Facsimile) for details.