Panasonic tu-cth100 Manual

 

 

 

This PVR allows you to set a timer event to record a programme broadcast up to one month in the future  
 
A Timer Event can be created in two ways 
 
1.Through the TV Guide(Up to 7 days) 
To access the TV Guide from the Timer Menu press the Green Key(see page 15)  
 
2.Through the Timer Menu(Up to 1 month) 
From the Setup Menu select the Timer Menu option and press the Ok key. 
If no Timer Events are in the Timer Menu, Position 1 will be selected. 
If there are already timer events stored in the Timer Menu, to enter a new Timer Event 
press the Red (New)key and the first available position will be selected. 
Title / Channel column 
A Drop Down list of available channels will appear on screen 
Use the cursor keys to select the channel you wish to record and press the OK key  
The selected channel will be entered into the Title/Channel column and the highlighted 
cursor will move to the Date column. 
Date Column 
Enter the required date (Up to 1 month in advance) using the cursor keys or the 
number keys. A weekly or daily event can also be entered in this column(see page 18). 
Press the OK key to store and move the Highlight to the Start Column 
Start Column 
Enter the Start time using the cursor keys and press the OK key.The Start time can 
also be entered directly using the number keys. The highlight will move to the Stop 
Column.  
Stop Column 
Enter the Stop time using the cursor keys and press the OK key.The Stop time can 
also be entered directly using the number keys.  
Record Column 
The Record column allows you to set the target for the recording i.e. where the 
recording will be stored. Use the Channel Up/Down keys to choose between the three 
available options. 
 

Recording will be stored on the Internal 
Hard Disk Drive 

Recording will be made through AV2 to 
an atttached recording device. No 
Subtitles will be displayed. 

Recording will be made through the 
AV2 to an atttached recording device. 
Subtitles will be displayed if available. 

 
If the External options are selected, remember to set your Recorder timer to match 
the required event. If your Recorder supports External Link recording control, the 
PVR will automatically control the external device recording. Please refer to your 
recording device manual to confirm that it is compatible with this system. The 
Timer Event will not be recorded to the HDD. 
 
Once all settings are correct press the Red key to store the timer event. 
The symbol will appear on the front panel indicating that a timer event is set. 
Set another timer event usng the above method or press the EXIT key to leave the menu. 
 
This PVR contains two tuner units which enables  two timer events which overlap to be set.