Panasonic HPS14042 Operating Guide
5
VQT3S52
Supplied Accessories
[Inspection to be performed when you unpack
the unit]
When removing the unit from its packing box, check
that the main unit and the supplied accessories are
there and also check their external appearance and
functions to verify that they have not sustained any
damage during distribution and transportation.
If you discover any trouble, contact your vendor
before using the product.
Product numbers correct as of September 2011.
Product numbers correct as of September 2011.
These may be subject to change.
1
Lens Storage Bag
2
Lens Cap
3
Lens Rear Cap
(The lens rear cap and lens cap are attached to
the interchangeable lens at the time of purchase.)
Attaching/Detaching the Lens
≥
Refer also to the camera’s operating instructions
for attaching and detaching the lens.
∫
Attaching the Lens
≥
Check that the camera is turned off.
1 Turn the lens rear cap
to detach it.
A
: Lens Rear Cap
2
Align the lens fitting
marks
B
(red marks)
on
the camera body and the
lens and then rotate the
lens in the direction of
the arrow until it clicks.
• Do not press the lens
release button C when you
attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.
VFC4460
VYF3443
1
2
3
VFC4605
VQT3S52_E.book 5 ページ 2011年8月30日 火曜日 午後5時55分
5
VQT3S52
Supplied Accessories
[Inspection to be performed when you unpack
the unit]
When removing the unit from its packing box, check
that the main unit and the supplied accessories are
there and also check their external appearance and
functions to verify that they have not sustained any
damage during distribution and transportation.
If you discover any trouble, contact your vendor
before using the product.
Product numbers correct as of September 2011.
Product numbers correct as of September 2011.
These may be subject to change.
1
Lens Storage Bag
2
Lens Cap
3
Lens Rear Cap
(The lens rear cap and lens cap are attached to
the interchangeable lens at the time of purchase.)
Attaching/Detaching the Lens
≥
Refer also to the camera’s operating instructions
for attaching and detaching the lens.
∫
Attaching the Lens
≥
Check that the camera is turned off.
1 Turn the lens rear cap
to detach it.
A
: Lens Rear Cap
2
Align the lens fitting
marks
B
(red marks)
on
the camera body and the
lens and then rotate the
lens in the direction of
the arrow until it clicks.
• Do not press the lens
release button C when you
attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.
VFC4460
VYF3443
1
2
3
VFC4605
VQT3S52_E.book 5 ページ 2011年8月30日 火曜日 午後5時55分
5
VQT3S52
Supplied Accessories
[Inspection to be performed when you unpack
the unit]
When removing the unit from its packing box, check
that the main unit and the supplied accessories are
there and also check their external appearance and
functions to verify that they have not sustained any
damage during distribution and transportation.
If you discover any trouble, contact your vendor
before using the product.
Product numbers correct as of September 2011.
Product numbers correct as of September 2011.
These may be subject to change.
1
Lens Storage Bag
2
Lens Cap
3
Lens Rear Cap
(The lens rear cap and lens cap are attached to
the interchangeable lens at the time of purchase.)
Attaching/Detaching the Lens
≥
Refer also to the camera’s operating instructions
for attaching and detaching the lens.
∫
Attaching the Lens
≥
Check that the camera is turned off.
1 Turn the lens rear cap
to detach it.
A
: Lens Rear Cap
2
Align the lens fitting
marks
B
(red marks)
on
the camera body and the
lens and then rotate the
lens in the direction of
the arrow until it clicks.
• Do not press the lens
release button C when you
attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.
VFC4460
VYF3443
1
2
3
VFC4605
VQT3S52_E.book 5 ページ 2011年8月30日 火曜日 午後5時55分
5
VQT3S52
Isporučeni pribor
[Provjera koju je potrebno izvršiti pri
raspakiravanju uređaja]
Pri vađenju uređaja iz kutije za pakiranje provjerite
nalaze li se glavna jedinica i isporučeni pribor u njoj
i također provjerite njihov vanjski izgled i funkcije
da biste potvrdili da nije došlo do oštećenja prilikom
distribucije i prijevoza. Ako otkrijete bilo kakve
probleme, obratite se prodavaču prije upotrebe
uređaja.
Brojevi dijelova važeći su od rujna 2011. Podložni
su promjenama.
1 Vrećica za objektiv
2 Poklopac objektiva
3 Stražnji poklopac objektiva
(U trenutku kupnje stražnji poklopac objektiva i
poklopac objektiva pričvršćeni su na izmjenjivi
objektiv.)
Pričvršćivanje/skidanje
objektiva
● Detalje o pričvršćivanju i skidanju objektiva
potražite u uputama za upotrebu fotoaparata.
■
Pričvršćivanje objektiva
● Provjerite je li fotoaparat isključen.
1 Okrenite stražnji
poklopac objektiva da
biste ga odvojili.
Ⓐ: Stražnji poklopac
objektiva
2 Stavite objektiv na
oznake za podešavanje
objektiva
Ⓑ (crvene
oznake) na kućištu
fotoaparata i zakrenite
objektiv u smjeru
strelice dok ne klikne.
• Nemojte pritiskati gumb za otpuštanje objektiva
Ⓒ dok pričvršćujete objektiv.
• Nemojte pričvršćivati objektiv dok ga držite
ukoso u odnosu na kućište fotoaparata da ga
ne biste ogrebali.
• Provjerite je li objektiv pravilno pričvršćen.