Panasonic KXHNS101E Operating Guide
3
Registration
Required only if the window/door
sensor was purchased separately
(i.e., not as part of a bundle).
Required only if the window/door
sensor was purchased separately
(i.e., not as part of a bundle).
4
Confirm the installation area
Read the information in this
document to confirm that the
desired installation area is suitable
to proper operation.
Read the information in this
document to confirm that the
desired installation area is suitable
to proper operation.
5
Temporary placement
Temporarily place the window/
door sensor in the desired location
and confirm that it operates
properly (page 13).
Temporarily place the window/
door sensor in the desired location
and confirm that it operates
properly (page 13).
6
Installation
Install the window/door sensor on
the same position where proper
operation was confirmed
(page 16).
Install the window/door sensor on
the same position where proper
operation was confirmed
(page 16).
Inserting the battery
R USE ONLY a CR2 Lithium battery.
R Confirm the polarities (
R Confirm the polarities (
,
).
1
Remove the sensor unit cover.
R Lift from the indented area (A)
R Lift from the indented area (A)
and open the sensor unit cover
(B).
(B).
1
2
2
Insert the battery.
3
Attach the sensor unit cover.
10
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
Setup
HNS101E_(en_en)_1228_ver.106.pdf 10
2016/12/28 11:30:44