Panasonic KXFL403FX Operating Guide

Page of 70
5. Copy
37
5 Copy
Copying
5.1 Making a copy
1
Adjust the width of the document guides (
1) to fit 
the actual size of the document.
2
Insert the document (up to 15 pages) FACE DOWN 
until the unit grasps the document and a single beep 
is heard.
L
If the document guides are not adjusted to fit the 
document, re-adjust them.
3
If necessary, press {A} or {B} repeatedly to select 
the desired resolution.
4
Press {COPY}.
5
If necessary, enter the number of copies (up to 99).
6
Press {START}, or the unit will start copying within 
20 seconds.
L
The unit will start copying.
Note:
L
Any document which can be sent as a fax can also 
be copied (page 28).
To stop copying
Press {STOP}.
To select the resolution
Select the desired resolution according to the type of 
document.
FINE”: For printed or typewritten documents with 
small print.
SUPER FINE”: For documents with very small print.
PHOTO”: For documents containing photographs, 
shaded drawings, etc.
MIXED” (Photo with text): For documents 
containing photographs and text.
L
If you select 
STANDARD”, copying will be done 
using 
FINE” mode.
5.1.1 More copying features
To enlarge a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {A} repeatedly to select from 
105%” to 
200%” by changing the enlargement rate 5% at a 
time.
4. Press {START}.
L
The unit will only enlarge the centre of the upper 
part of the document. To make an enlarged copy 
of the bottom of the document, turn the document 
around, and then make a copy.
Example: 150% enlarged copy
To reduce a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {B} repeatedly to select from 
50%” to “95%” 
by changing the reduction rate 5% at a time.
4. Press {START}.
Example: 70% reduced copy
{>}{A}{B}
{
COPY}
{
STOP}
1
{
START}
Original document
Enlarged copy
Original document
Reduced copy
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
FL403FX-PFQX2655ZA-en.book  Page 37  Friday, July 7, 2006  6:28 PM