Panasonic KXFL403FX Operating Guide

Page of 70
7. Help
52
Replacement
7.4 Replacing the toner cartridge 
and the drum unit
When the display shows the following, replace the toner 
cartridge.
TONER LOW
TONER EMPTY
To check the drum life and quality, please print the printer 
test list (page 62). If printing quality is still poor, replace 
the toner cartridge and drum unit. To ensure that the unit 
operates properly, we recommend the use of Panasonic 
toner cartridge (Model No. KX-FAT88E/KX-FAT88X) 
and drum unit (Model No. KX-FAD89E/KX-FAD89X)

See page 8 for accessory information.
To maintain print quality and machine life, we 
recommend you to clean slots and openings (page 5) 
and the inside of the unit (page 59) when replacing the 
toner cartridge and/or drum unit.
Caution:
L
We cannot be responsible for any damage to the 
unit or degradation of print quality which may 
occur from the use of a non-Panasonic toner 
cartridge and drum unit.
L
The drum unit contains a photosensitive drum. 
Exposing it to light may damage the drum.
Once you have opened the protection bag:
Do not expose the drum unit to light for more 
than 5 minutes.
Do not touch or scratch the black drum 
surface.
Do not place the drum unit near dust or dirt, 
or in a high humidity area.
Do not expose the drum unit to direct 
sunlight.
L
Do not unplug the fax machine. Loss of fax 
documents in memory may occur.
L
Do not leave the toner cartridge out of the 
protection bag for a long time. It will decrease the 
toner life.
L
Do not add toner to the toner cartridge.
1
Before opening the protection bag of the new toner 
cartridge, shake it vertically more than 5 times.
2
Remove the new toner cartridge from the protection 
bag. Peel off the seal (
1) from the toner cartridge.
3
Remove the handset and document stacker.
4
Lift open the front cover (
1), holding the OPEN tab 
(
2).
5
Remove the drum and toner unit (
1) by holding the 
two tabs.
L
Do not touch the transfer roller (
2).
L
If you replace the toner cartridge and the drum 
unit at the same time, skip to step 9.
Caution:
The fuser unit (
3) gets hot. Do not touch 
it.
1
1
2
3
1
2
FL403FX-PFQX2655ZA-en.book  Page 52  Friday, July 7, 2006  6:28 PM