Panasonic DMC-TZ10 Operating Guide

Page of 17
2   
VQT2L71 (ENG)
 (ENG) VQT2L71
   3
Dear Customer,
We would like to take this opportunity to thank you for purchasing this 
Panasonic Digital Camera. Please read these Operating Instructions 
carefully and keep them handy for future reference. Please note that the 
actual controls and components, menu items, etc. of your Digital Camera 
may look somewhat different from those shown in the illustrations in 
these Operating Instructions.
Carefully observe copyright laws.
 •Recording of pre-recorded tapes or discs or other published or 
broadcast material for purposes other than your own private use may 
infringe copyright laws. Even for the purpose of private use, recording 
of certain material may be restricted.
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT 
DAMAGE,
 DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, 
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED 
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE 
APPARATUS.
 USE ONLY THE RECOMMENDED ACCESSORIES.
 DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO 
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
Product Identification Marking is located on the bottom of units.
Caution for AC mains lead
For your safety, please read the 
following text carefully.
This appliance is supplied with a 
moulded three pin mains plug for your 
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced 
please ensure that the replacement 
fuse has a rating of 5-ampere and that it 
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark 
 or the BSI 
mark   on the body of the fuse.
If the plug contains a removable fuse 
cover you must ensure that it is refitted 
when the fuse is replaced.
If you lose the fuse cover the plug must 
not be used until a replacement cover 
is obtained.
A replacement fuse cover can be 
purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS 
UNSUITABLE FOR THE SOCKET 
OUTLET IN YOUR HOME THEN 
THE FUSE SHOULD BE REMOVED 
AND THE PLUG CUT OFF AND 
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE 
ELECTRICAL SHOCK IF THE CUT 
OFF PLUG IS INSERTED INTO ANY 
13- AMPERE SOCKET.
If a new plug is to be fitted please 
observe the wiring code as stated 
below.
If in any doubt please consult a qualified 
electrician.
 
IMPORTANT
The wires in this mains lead are 
coloured in accordance with the 
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond 
with the coloured markings identifying 
the terminals in your plug, proceed as 
follows:
The wire which is coloured Blue must 
be connected to the terminal which is 
marked with the letter N or coloured 
Black or Blue.
The wire which is coloured Brown must 
be connected to the terminal which is 
marked with the letter L or coloured 
Brown or Red.
WARNING: DO NOT CONNECT 
EITHER WIRE TO THE EARTH 
TERMINAL WHICH IS MARKED WITH 
THE LETTER E, BY THE EARTH 
SYMBOL   OR COLOURED GREEN 
OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF 
KEEP DRY.
 
Before use
Remove the connector cover.
 
How to replace the fuse
The location of the fuse differ according 
to the type of AC mains plug (figures A 
and B). Confirm the AC mains plug fitted 
and follow the instructions below.
Illustrations may differ from actual AC 
mains plug.
1.  Open the fuse cover with a 
screwdriver.
Figure A
Figure B
Fuse cover
2.  Replace the fuse and close or attach 
the fuse cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)