Panasonic DMCTZ41EB Operating Guide

Page of 314
GPS and map functions 
DMC-TZ40
 
DMC-TZ41
Using the compass
VQT4T12
- 185 -
Measures the 16 cardinal directions based on the 
orientation of this unit’s lens.
 •The coloured part of the compass needle points 
north.
 •If [GPS Setting] is set to [OFF], declination 
correction is not performed.
North
About declination correction
Earth is a large magnet that has the north pole as the S pole, and the south pole as 
the N pole, and the magnetism that the Earth has is called “geomagnetism”. Due to 
the effects of “geomagnetism”, a discrepancy in angle occurs between the north that 
the magnetic compass points to (magnetic north) and the correct north (true north). 
This discrepancy in angle is called “declination angle”.
The compass that is built-in to this unit corrects the “declination angle” based on the 
latitude/longitude obtained by GPS positioning, so that it points to “true north”.
 •
Since moving may change the degree of declination depending on the place, 
we recommend that you set [GPS Setting] to [ON], and frequently update your 
current latitude/longitude.
 
If measurements are taken with this unit upside down, it may be unable to take 
measurements correctly.
 
In places with weak geomagnetism, the position measurement may be affected.
 
If objects such as the following are nearby, this unit may be unable to take 
measurements correctly.
 •Permanent magnets (metals like magnetic necklaces)/metals (metal desks, lockers)/
high-voltage lines or wirings/electrical home appliances (such as TVs, PCs, cell 
phones, speakers)
 
In places such as the following, this unit may be unable to take measurements 
correctly.
 •Automobiles/trains/ships/airplanes/indoors (if the steel frames are magnetised)