Panasonic DMCTZ41EB Operating Guide

Others

Using the AC adaptor (optional) and DC coupler

(optional) instead of the battery

VQT4T12

- 271 -

Others

By using the AC adaptor (optional) and DC coupler (optional), you can record and play

back without worrying about the remaining battery charge.

The optional DC coupler can only be used with the designated Panasonic AC adaptor.

DC IN socket

DC coupler

cover

Confirm the direction

of the connector and

insert it straight into the

socket.

AC adaptor

Insert DC coupler instead of

battery
Open DC coupler cover

•If difficult to open, with the card/

battery door open, press the DC

coupler cover from the inside to

open it.

Close the door and slide the

release lever to the [LOCK]

position
Plug AC adaptor into power

outlet
Connect AC adaptor to DC

IN socket of DC coupler

●

Always use a genuine Panasonic AC adaptor (optional).

●

Use the AC adaptor and DC coupler specifically for this camera. Using other adaptors

or couplers could cause camera failure.

●

It may not be possible to install camera on a tripod or unipod when the DC coupler is

connected, depending on the type of tripod or unipod.

●

The camera cannot be stood up when the AC adaptor is connected. If you are leaving

the camera on a surface as you work, it is recommended to set it on a soft cloth.

●

When the AC adaptor is connected, always remove the AC adaptor when opening the

card/battery door.

●

Remove the AC adaptor and DC coupler when not in use and close the DC coupler

cover.

●

Also read the AC adaptor and DC coupler operating instructions.