Panasonic DMCTZ19EB Operating Guide
14
VQT3H37 (ENG)
(ENG) VQT3H37
15
Inserting and removing the card
(optional)/the battery
■
To remove
•To remove battery:
move lever in direction of arrow.
•To remove card:
press down in centre.
Lever
●
Always use genuine Panasonic batteries (DMW-BCG10E).
●
If you use other batteries, we cannot guarantee the quality of this
product.
●
Insert the card fully, otherwise it may be damaged.
Set the camera ON/OFF switch
to OFF and slide the release
lever ( ) to [OPEN] before
opening the lid
[OPEN] [LOCK]
Insert the battery and card,
making sure that their
orientation is correct
•Battery: Insert all the way firmly until
a locking sound is heard, and
check that the lever is hooked
over the battery.
•Card: Insert all the way firmly until it
clicks.
Close lid
Slide to the [LOCK] position.
Picture save destination (cards and built-in memory)
■
Built-in memory (approx. 70 MB)
●
The built-in memory can be used as a temporary storage device when
the card being used becomes full.
●
The access time for the built-in memory may be longer than the access
time for a card.
■
Compatible memory cards (optional)
The following SD standard-based cards
(Panasonic brand recommended)
Type of Card
Capacity
Notes
SD
Memory Cards
8 MB – 2 GB
•Using a card of SD Speed “Class 6”
*
or above
is recommended for recording motion pictures.
•Can be used with devices compatible with the
respective formats.
•Before using SDXC Memory Cards, check that
your computer and other devices support this
type of card.
http://panasonic.net/avc/sdcard/information/SDXC.html
•Only the cards listed on the left with the given
capacities are supported.
SDHC
Memory Cards
4 GB – 32 GB
SDXC
Memory Cards
48 GB, 64 GB
* SD speed class refers to a specification for sustained write speeds.
Confirm the SD speed by checking the card label or other card related
materials.
(Example)
●
Latest information:
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
●
Keep the Memory Card out of reach of children to prevent swallowing.