Teka DB1 60 40460010 User Manual

12

TEKA INDUSTRIAL S.A. reserves the right to make changes and corrections to its products as
it deems necessary, without altering their basic characteristics.

• If your kitchen hood is made from stainless

steel, use proprietary cleaners mentioned
in the product instructions.

• If your kitchen hood is painted, use

lukewarm water and a neutral soap. 

• Never use metallic scourers, nor abrasive

or corrosive products.

• Dry the kitchen hood using a cloth that

does not produce fibres.

• The use of vapour cleaners is not

recommended.

To remove the filters from their fittings, press
lightly on the locks and then pull them off.

The metal filters can be cleaned by soaking
them in hot water with neutral detergent until
the fat dissolves and then rinsing them under
the tap or using special anti-grease products.
They can also be washed in a dishwasher. In
this case, it is advisable to stack them
vertically to avoid food residues to stick to
them.
Cleaning in a dishwasher may damage the
metallic surface (blackening it), although this
will not affect its fat retention capacity.
Once clean, leave them to dry off and then fit
them onto the kitchen hood.

Proceed as follows:
• Remove the metal filters.
•   Change the broken/burnt out lamp.

Maximum lamp power is 40W (E-14).

•  Fit the metal filters.

_________________________________________________________

Proceed with the following checks before calling the Technical Service:

See page 30.