Panasonic KX-PS8000 Manual

The printer uses five different trays:

B

Make sure that you load the correct media.
Each tray is designed and labeled for only
paper or transparency. If you load the incorrect
media type in a tray, it may cause a jam.

B

If you have the 2nd Cassette Feeder installed:



If you wish to use the automatic cassette-
switching feature (a large print job, for
example), make sure that all trays in the
printer are the same media type and size.



The transparency tray should be inserted in
the upper or middle tray slots.

The printer is shipped with a media tray (A4 paper)
installed.

Pull the media tray out of the printer.

Remove all packaging materials from
inside the media tray; refer to the
instruction sheet attached to the tray.

Push down on the metal plate until it
clicks, locking it in place.

Fan the media (paper/transparencies),
then tap it on a level surface to avoid
media jams or skewed printing. 

B

Paper weight

B&W 

60 to 105 

/m

2

(16 to 28 lbs.)

Color

75 to 105 

/m

2

(20 to 28 lbs.)

Recommended paper  

(for optimum performance):
NEUSIEDLER COLOR COPY 90 

/m

2

(24 lbs.)

B

We do not recommend the use of 105 

/m

2

(28 lbs.) paper in areas of high or low humidity
and temperature since paper feed problems
may be experienced.

B

To optimize your printer’s performance, always
use clean, unused media. 

B

Be careful not to leave fingerprints on the
media, which can result in a smudged print.

B

Reusing media that has been fed through the
printer once (for example, after jams) can
reduce the life of the consumables and paper
path components.

B

The recommended transparency is 3M
CG3700. If the print quality is poor, print on the
other side.

Legal Paper

A4 Paper

A4
Transparency

Letter Paper

Letter
Transparency

210 mm x 297 mm 
(8.3

″

x 11.7

″

)

210 mm x 297 mm 
(8.3

″

x 11.7

″

)

216 mm x 279 mm 
(8.5

″

x 11

″

)

216 mm x 279 mm 
(8.5

″

x 11

″

)

216 mm x 356 mm 
(8.5

″

x 14

″

)