Panasonic KX-PS8000 Manual
41
If you wish to adjust the density for
each color independently, perform the
following, then go to step 5.
each color independently, perform the
following, then go to step 5.
#
Repeat instructions
#
through
%
of step 1 on page 39.
$
Press the
F
button.
%
Press the ENTER button.
&
Press the
F
/
I
button to
darken/lighten the cyan color.
Pressing the
F
/
I
button twice selects the
next/previous level setting.
(For example:)
B
If you wish to make the density setting
darker by 4 levels:
Press the
F
button 8 times.
B
If you wish to make the density setting
lighter by 2 levels:
Press the
I
button 4 times
'
Press the ENTER button.
(
Repeat instructions
%
through
'
for each color
(MAGENTA, YELLOW, BLACK).
(MAGENTA, YELLOW, BLACK).
B
To skip a color, press the
F
button.
B
To return to a previous color, press the
I
button.
B
Before going to step 5, make sure the
following is displayed.
following is displayed.
Press the ENTER button to reprint the
Color Calibration Page.
Color Calibration Page.
B
The line enclosure reflects the changes
made to the settings.
made to the settings.
B
If you are not satisfied with the current color
density settings, repeat steps 4 and 5
above.
density settings, repeat steps 4 and 5
above.
Notes:
B
The color density setting affects the average
life of toner.
life of toner.
B
Save the Color Calibration Card for future
calibrations.
calibrations.
Setup
Setting
the
Color
Density
5
Color Calibration
CYAN
CYAN
Color Calibration
Calibration Test Print
Calibration Test Print
CYAN
0* (-10 to 10)
0* (-10 to 10)
Color Calibration
MAGENTA
MAGENTA
4
B