Panasonic KX-PS8000 Manual
43
Perform the following and go to page
44 or 46 depending upon the
operation.
44 or 46 depending upon the
operation.
■
Using the ADF
#
Fan the stack of documents and
tap it on a level surface to avoid
document jams.
tap it on a level surface to avoid
document jams.
$
Insert the documents fully in the
ADF tray with the printed sides
facing up and top of the documents
first.
ADF tray with the printed sides
facing up and top of the documents
first.
The height of document should not exceed
the limit mark on the document guide, or it
may cause a jam.
%
Adjust the document guides to the
width of the documents.
width of the documents.
■
Using the scanner glass
#
Open the ADF.
$
Place the document face down on
the scanner glass referring to the
document position marks.
the scanner glass referring to the
document position marks.
%
Close the ADF.
Notes:
B
When scanning a book type document of
more than 2 cm (0.79
more than 2 cm (0.79
″
) thickness, scan it
with the ADF open.
B
Scanning a document using the flatbed
(scanner glass) produces better quality than
scanning it using the ADF. For best scanning
quality use flatbed scanning.
(scanner glass) produces better quality than
scanning it using the ADF. For best scanning
quality use flatbed scanning.
B
If you scan poorly fixed originals such as
catalogs using ADF, they may be partially
stained. To prevent the originals from getting
stained, use the flatbed scanning.
catalogs using ADF, they may be partially
stained. To prevent the originals from getting
stained, use the flatbed scanning.
Placing Documents
$
#
%
%
$
%
Basic
Operations
Before
Operation
(Placing
Documents)