Panasonic KX-PS8000 Manual

Scanning operation cannot be
performed.

Connect the SCSI cable 
( 

☞

P. 26-28).

Use a recommended SCSI-2
board ( 

☞

P. 11).

ADF doesn’t feed document.

Consult the Utilities and Drivers
Reference manual.

Unlock the scanner 
( 

☞

P. 21).

Connect the AC cord.

Set the SCSI ID No. correctly 
( 

☞

P. 29).

Install the software 
( 

☞

P. 31).

Clean the document.

Clean the scanner glass.

Reposition the document
correctly according to the size.

Set the document evenly.

Scan the document by placing it
on the scanner glass.

The height of document should
not exceed the limit mark on the
document guide.

AC cord is not connected.

Scanner is locked.

SCSI cable is not properly
connected.

SCSI ID No. is not set correctly.

SCSI-2 board is not compatible.

Software may not be installed.

Original document is dirty.

Scanner glass is dirty.

Document is not positioned
correctly.

Document is not evenly set on the
scanner glass.

You may not be using the
software utility correctly.

Document thickness is out of
specifications.

Too many documents are
inserted in the ADF tray.

Scanner does not turn on.

Scanned image is dirty.

One or both ends of image is/are
not scanned.

Scanned image is blurred or
partially colored.

Scan quality is bad.

Condensation has occurred.

Leave the unit for 4 or 5 hours.

ABCD - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - -

Scanner Error 49 is displayed on
LCD when powered on.