Panasonic KX-PS8000 Manual

Replace the imaging unit; make
sure that the old imaging unit is
not exposed to light for more than
45 seconds.
If a new imaging unit does not
correct the problem:

B

Put the old imaging unit back
into the printer.

B

Repack the new imaging unit.

Light vertical streaks appear in all
colors.

The main charge grid is dirty.

Media frequently wraps around
the fuser.

The oil supply roll has reached
the end of its useful life.

On the Maintenance Page, one or
more dark vertical lines appear on
the print in all colors.

Print 5-10 pages of blank pages
to clean the roller.
If you still see the problem:

B

Replace the oil supply roll.
If you still see the problem:

B

Replace the fuser.

Replace the oil supply roll.

The fuser is near the end of its
useful life.

Replace the fuser (depending on
your quality needs, you can
continue to print until the dark
vertical lines appear).

The surface of the printed image
appears to have vertical
scratches (visible by holding the
print at an angle and observing
the “shine” of the image).
At first, the scratches appear only
on the printed image; eventually,
dark vertical scratches appear on
the unprinted portion of the page.

A piece of the printed image is
missing and reappears out of
place, approximately 129 mm (5

″

)

down the page.

The fuser’s internal roller is not
being consistently oiled.

or

The fuser’s internal roller is
contaminated with toner particles.

The imaging unit is scratched.

The fuser is damaged.

Replace the fuser.

Dark and wavy vertical streaks
appear in all colors.

Replace the imaging unit.

Replace the imaging unit.

The main charge grid is dirty.